Omron S8FS-C35024J Power Supply
Omron S8FS-C35024J SMPS is a 350 W switch mode power supply configured to deliver 24 VDC with 14.6 A rated output current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 88% and supports 100 to 240 VAC rated input, with allowable ranges extending from 90 to 264 VAC and 254 to 373 VDC. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C35024J provides a direct-mount 350 W, 24 VDC configuration. Compare other 350W 24V power supplies from Omron automation products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C35024J |
Omron S8FS-C35024J Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 350W |
| Output voltage | 24V |
| Rated output current | 14.6A |
| Terminal type | Screw |
| Phase | Single |
| Number of output branches | 1 |
| Allowable supply voltage DC | 254-373 V |
| Mounting method | Direct mounting |
| Type | Metal frame |
| Efficiency | 88% |
| Temperature range | -20-60? |
| Rated supply voltage at AC 50 Hz | 100-240V |
| Height | 50mm |
| Width | 112.5mm |
| Depth | 212mm |
| Features | Terminal block facing upward |
| Allowable supply voltage AC | 90-264 V |
The Omron S8FS-C35024J Power Supply provides 350 W rated power with a 24 VDC output and 14.6 A rated current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 88%. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. These specifications place the model in a higher-capacity 24 VDC class where load demand, panel surface, enclosure depth, source voltage, and wiring clearance should be evaluated as connected selection factors.
The connected load should require 24 VDC and remain within the 14.6 A current rating. Direct mounting requires adequate fixed panel area, while the 212 mm depth should be checked against available cabinet space. The upward-facing terminal block also needs sufficient conductor clearance. Where electrical capacity must remain at 350 W, 24 VDC, and 14.6 A but the installation requires DIN rail mounting, compare the Omron S8FS-C35024D.


