+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C15024J Power Supply

Omron S8FS-C15024J SMPS is a 150 W switch mode power supply configured to provide 24 VDC with a rated output current of 6.5 A. It uses single-phase input, direct mounting, and screw terminals for fixed installation inside control panels. The metal-frame power supply has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 90 to 264 VAC and 254 to 373 VDC. Its enclosure measures 38 mm wide, 97 mm high, and 199 mm deep, while the terminal block faces upward. Within the S8FS-C Series, the S8FS-C15024J provides a direct-mount 150 W, 24 VDC configuration. Compare other 24V power supply models from Omron automation products.

Omron S8FS-C15024J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C15024J

Omron S8FS-C15024J Power Supply – Technical Specifications

SpecificationValue
Power rating150W
Output voltage24V
Rated output current6.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC254-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency87%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth199mm
FeaturesTerminal block facing upward
Allowable supply voltage AC90-264 V

The Omron S8FS-C15024J Power Supply provides 150 W rated power with a 24 VDC output and 6.5 A rated current for industrial DC loads. It uses single-phase input, direct mounting, screw terminals, and terminal blocks for fixed panel installation. Rated input is 100 to 240 VAC, with allowable ranges from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 87%. Its enclosure measures 38 mm wide, 97 mm high, and 199 mm deep, while the terminal block faces upward. These specifications define a direct-mount 24 VDC supply where current capacity, mounting surface, enclosure depth, and wiring clearance all influence selection.

The connected load should operate from 24 VDC and keep total current within the 6.5 A rating. The 199 mm depth should be checked against available enclosure space, while the upward-facing terminal block requires room for conductor routing. A useful comparison keeps the electrical ratings aligned and changes the mounting relationship, making it easier to understand which installation format is more appropriate. For a 150 W supply with the same 24 VDC output and 6.5 A current but DIN track mounting, compare the Omron S8FS-G15024CD-500.