+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C10024J SMPS 4.5 Amp Power Supply

Omron S8FS-C10024J SMPS is a 100 W switch mode power supply configured to provide 24 VDC for industrial control equipment. It delivers 4.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed electrical installation. The metal-frame unit has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 248 to 373 VDC. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C10024J provides a direct-mount 100 W, 24 VDC configuration. Compare other 24V 4.5A power supplies from Omron electrical control products.

Omron S8FS-C10024J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C10024J

Omron S8FS-C10024J SMPS 4.5 Amp Power Supply – Technical Specifications

SpecificationValue
Power rating100W
Output voltage24V
Rated output current4.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC248-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency87%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth159mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264 V

The Omron S8FS-C10024J Power Supply provides 100 W rated power with a 24 VDC output and 4.5 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed electrical installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 248 to 373 VDC. The metal-frame unit has a stated efficiency of 87%. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. These electrical and mechanical characteristics define how the power supply can be integrated where output load, panel surface, enclosure depth, and terminal clearance need to be evaluated together.

The connected control load should require 24 VDC and remain within the 4.5 A current rating. Direct mounting differentiates this model from DIN rail configurations and should be checked against the available panel design. The allowable AC and DC input ranges identify the incoming supply conditions supported by the unit. Screw terminals provide fixed electrical connections, while the upward-facing terminal block should have sufficient wiring clearance. The 159 mm depth should also be considered where enclosure space is restricted. When comparing models, keep the required 24 VDC output constant and then evaluate current, power, and mounting format. For a lower-power direct-mount 24 VDC configuration rated at 15 W with 0.7 A output, see Omron S8FS-C01524J.