+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C10012 Power Supply

Omron S8FS-C10012 SMPS is a 100 W switch mode power supply designed to provide 12 VDC for industrial control equipment. It delivers 8.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 83% and supports 100 to 240 VAC rated input, with allowable AC input extending from 85 to 264 VAC and DC input from 248 to 373 VDC. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C10012 provides a direct-mount 100 W, 12 VDC configuration. Compare other 100W 12V power supplies from Omron machine automation.

Omron S8FS-C10012 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C10012

Omron S8FS-C10012 Power Supply – Technical Specifications

SpecificationValue
Power rating100W
Output voltage12V
Rated output current8.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC248-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency83%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth159mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264V

The Omron S8FS-C10012 Power Supply provides 100 W rated power with a 12 VDC output and 8.5 A rated current for industrial control applications. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, with an allowable AC range of 85 to 264 V and an allowable DC range of 248 to 373 V. The metal-frame unit has a stated efficiency of 83%. Its enclosure measures 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. These specifications allow the unit to be evaluated according to output voltage, current capacity, mounting surface, enclosure depth, wiring access, and incoming supply conditions.

The connected load should require 12 VDC and remain within the 8.5 A rated current. Direct mounting means the mechanical panel layout should be checked before installation rather than treating the unit as interchangeable with DIN rail models. The allowable AC and DC input ranges define the supported incoming supply conditions, while screw terminals provide fixed wiring. Its 159 mm depth and upward-facing terminal block should also be considered when planning enclosure clearance. When comparing alternatives, output voltage should remain the first filter, followed by current requirement, power rating, mounting method, and available space. For a 100 W direct-mount model with 24 VDC output and 4.5 A rated current, see Omron S8FS-G10024C-500.