+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C10012J Power Supply

Omron S8FS-C10012J SMPS is a 100 W switch mode power supply designed to provide 12 VDC for industrial control equipment. It delivers 8.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 83% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 248 to 373 VDC. Its dimensions are 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C10012J provides a direct-mount 100 W, 12 VDC configuration. Compare other 100W 12V power supplies from Omron control components.

Omron S8FS-C10012J Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C10012J

Omron S8FS-C10012J Power Supply – Technical Specifications

SpecificationValue
Power rating100W
Output voltage12V
Rated output current8.5A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC248-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency83%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth159mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264 V

The Omron S8FS-C10012J Power Supply provides 100 W rated power with a 12 VDC output and 8.5 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 248 to 373 VDC. The metal-frame unit has a stated efficiency of 83%. Its enclosure measures 38 mm wide, 97 mm high, and 159 mm deep, with the terminal block facing upward. These specifications define how the power supply fits electrically and mechanically into a control panel where output voltage, current requirement, mounting surface, enclosure depth, and wiring access must be considered together.

The connected equipment should require 12 VDC and have combined current demand within the 8.5 A rating. Direct mounting means the available panel surface and fixing arrangement should be checked before installation. The allowable AC and DC input ranges define supported incoming supply conditions, while screw terminals provide fixed electrical connections. Its 159 mm depth and upward-facing terminal block should also be considered when planning enclosure and conductor clearance. Voltage compatibility should be checked first, followed by current demand, rated power, mounting method, and available installation space. For a lower-power direct-mount configuration rated at 15 W with 5 VDC and 3 A output, see Omron S8FS-C01505J.