The Omron CP1L-L14DT1-D Programmable Logic Controller (PLC) is a compact CPU Unit built with 14 I/O points, offering 8 inputs and 6 transistor outputs. Powered by a DC supply, it provides a 5K-step memory capacity along with 100 kHz counters and 100 kHz pulse outputs for accurate control. The built-in USB port enables fast programming, making it suitable for small automation equipment. Manufactured by Omron within the Omron Programmable Logic Controller range of the Omron CP1L Series.
No insulation between primary and secondary for DC power
supply
Dielectric strength
No insulation between primary and secondary for DC power
supply
Noise immunity
Conforms to IEC 61000-4-4. 2 kV (power supply line)
Vibration resistance
Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions for
80 minutes each. Sweep time: 8 minutes Γ 10 sweeps = total time of 80 minutes)
Shock resistance
Conforms to JIS C60068-2-27. 147 m/s2 3 times each in X, Y, and Z directions
Ambient operating temperature
0 to 55Β°C
Ambient humidity
10% to 90% (with no condensation)
Ambient operating environment
No corrosive gas
Ambient storage temperature
β20 to 75Β°C (Excluding battery.)
Power holding time
2 ms min.
Function blocks
Maximum number of function block definitions: 128 Maximum number of instances: 256; Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length
1 to 7 steps per instruction
Instructions
Approx. 500 (function codes: 3 digits)
Instruction execution time
Basic instructions: 0.55 ΞΌs min. Special instructions: 4.1 ΞΌs min
Common processing time
0.4ms
Inrush current *
30 A max. (for cold start at room temperature)
20 ms max.
If youβre not fully sure about CP1L-L14DT1-D, taking a closer look at Siemens PLC, Omron SMPS 24V 10A and Nx1P2 1040Dt1 often helps compare reliability, cost, and availability.
