EPP3356-0022 - Beckhoff Industrial Housing
Technical Specifications of Beckhoff Industrial Housing EPP3356-0022:
| Brand | Beckhoff |
| Product Type | Industrial Housing |
| Product | EPP3356-0022 |
EPP3356-0022 Beckhoff Industrial Housing Technical Specifications
| Specification | Value |
|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, P-coded, shielded |
| Number of inputs | 2, for 1 resistor bridge in full bridge technology |
| Input connections | M12 x 1, 5-pin, a-coded |
| Sensor supply | 10 V (supplied from UP) |
| Current consumption from US | typ. 100 mA |
| Operating temperature | -25...+60°C |
| Storage temperature | -40...+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL (in preparation) |
| Housing - Dimensions (W x H x D) | 60 mm x 126 mm x 26.5 mm |
| Housing - Material | PA6 (polyamide) |
| Housing - Installation | 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4 |
| Special features | self-calibration, quadruple averager, dynamic filters, fast data sampling, parallel connection |
| Weight | approx. 250 g |
| Conversion time | 0.1â¦250 ms, configurable, max. 10,000 samples/s |
| Resolution | 24 bit, 32 bit presentation |
| Signal type | resistor bridge, strain gauge |
| Internal resistance | > 200 kΩ (UREF), > 1 MΩ (UD) |
| Measurement error/uncertainty | < ±0.01% for the calculated load value in relation to the final load value with a 10 V feed and 20 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active |
| Input filter limit frequency | 10 kHz low pass (-3 dB) |
| Nominal voltage | 24 V (-15%/+20%) |
