Many procurement teams check ELECTRIC-ATV212HD15N4 against Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software before signing purchase orders, verifying quality, compliance, and after-sales support availability.
ATV212HD15N4 - Schneider 20HP 480V Variable Speed Drive
The Schneider ATV212HD15N4 Variable Speed Drive offers a 20 hp motor power, 15 kW, 323…528 Vsupply voltage limits and 1 open style1 RJ45 connector type. Manufactured by Schneider under the Schneider Variable Speed Drive category, this model belongs to the Altivar212 Series.
| Brand | Schneider |
| Product Type | Variable Speed Drive |
| Model Number | ATV212HD15N4 |
ATV212HD15N4 Schneider 20HP 480V Variable Speed Drive Technical Specifications:
| Specification | Value |
|---|---|
| Connector Type | 1 open style1 RJ45 |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Motor power range AC-3 | 15…25 kW at 380…440 V 3 phases15…25 kW at 480…500 V 3 phases |
| Net weight | 11.65 kg |
| Switching frequency | 6...16 kHz adjustable12...16 kHz with derating factor |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 323…528 V |
| Operating position | Vertical +/- 10 degree |
| Discrete input type | F programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmR programmable 24 V DC, with level 1 PLC, impedance: 4700 OhmRES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm |
| Speed range | 1…10 |
| [Us] rated supply voltage | 380...480 V - 15...10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| IP degree of protection | IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1IP20 on upper part without blanking plate on cover conforming to IEC 60529IP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529IP41 on upper part conforming to IEC 61800-5-1IP41 on upper part conforming to IEC 60529 |
| Power dissipation in W | 625 W |
| Network frequency | 47.5...63 Hz |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14L1/R, L2/S, L3/T: terminal 25 mm² / AWG 3 |
| EMC filter | Class C2 EMC filter integrated |
| Motor starter type | Variable speed drive |
| Depth | 190 mm |
| Range of product | Altivar 212 |
| Nominal switching frequency | 12 kHz |
| Discrete output type | Configurable relay logic: (FLA, FLC) NO - 100000 cyclesConfigurable relay logic: (FLB, FLC) NC - 100000 cyclesConfigurable relay logic: (RY, RC) NO - 100000 cycles |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 3200 sAutomatic based on the load |
| Warranty | 18 months |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Display unit: 0.1 HzAnalog input: 0.024/50 Hz |
| Tightening torque | 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)4.5 N.m, 40 lb.in (L1/R, L2/S, L3/T) |
| Transmission rate | 9600 bps or 19200 bps |
| Assembly style | With heat sink |
| Motor power hp | 20 hp |
| Dielectric strength | 3535 V DC between earth and power terminals5092 V DC between control and power terminals |
| Regulation loop | Adjustable PI regulator |
| Speed drive output frequency | 0.5…200 Hz |
| Analogue output type | FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bitsFM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits |
| Analogue input type | VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bitsVIB configurable PTC probe: 0...6 probes, impedance: 1500 OhmVIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits |
| Ambient air temperature for storage | -25…70 °C |
| Type of cable | Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPRWithout mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVCWith UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC |
| Type of polarization | No impedance |
| Motor power kW | 15 kW |
| Variable speed drive application selection | Building - HVAC compressor for scrollBuilding - HVAC fanBuilding - HVAC pump |
Key technical highlights of the ATV212HD15N4 include an adjustable switching frequency range of 6–16 kHz (12–16 kHz with derating), IP20/IP21/IP41 protection ratings, and a wide supply voltage tolerance of 323–528 V. The drive features both analog and discrete I/O, RJ45 interface, and supports 0.5–200 Hz output frequency for smooth motor control. With a net weight of 11.65 kg and a compact depth of 190 mm, it's designed for easy integration. Advanced features like adjustable PI regulation, integrated motor starter, and programmable logic outputs allow engineers to configure it for precise load-based automation.
The Schneider Electric ATV212HD15N4 is widely used in building HVAC systems, pumps, and fan control setups. It meets global safety and performance standards (IEC 61800-5-1, IEC 60529) and comes with an 18-month warranty for assured reliability. If you're sourcing a high-performance 20HP drive with robust protection, smart regulation, and seamless system compatibility, this is the perfect fit. Explore more Schneider VFDs or get a customized quote today for the ATV212HD15N4 model.
Related Products
