If you’re not fully sure about P3PC211, taking a closer look at Sick Diffuse Sensor, Wenglor P1Kh006 and Wenglor Photoelectric Sensor often helps compare reliability, cost, and availability.
Wenglor P3PC211 Photoelectric Sensor
The Wenglor P3PC211 Photoelectric Sensor offers 50 ... 350 mm working range, 100 µm reproducibility maximum, 18 ... 30 V DC supply Voltage , M12 × 1; 5-pin connection. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor laser Series.
| Brand | Wenglor |
| Product Type | Photoelectric Sensor |
| Model Number | P3PC211 |
Wenglor P3PC211 Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Working Range | 50 ... 350 mm |
| Reproducibility maximum | 100 µm |
| Reproducibility: 1 Sigma | 10 µm |
| Linearity Deviation | 300 µm |
| Light Source | Laser (red) |
| Wavelength | 655 nm |
| Supply Voltage | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 60 mA |
| Response Time | < 0.5 ms |
| Temperature Drift | < 20 µm/K |
| Temperature Range | -30 ... 60 °C |
| Short Circuit Protection | yes |
| Setting Method | (OLED)/Bluetooth menu |
| Housing Material | Aluminum, anodised Plastic, ABS |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 5-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 71 g |
| Output | Error Output Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | Exposure time Laser light Switching hysteresis Teach-in mode Off-delay On-delay |
| Measuring Range | 50 ... 350 mm |
| Measuring Rate | 2,500 /s |
| Analog output | 0...10 V 4...20 mA |
