If you’re not fully sure about P1NH401, taking a closer look at P&F Photo Sensor, P1Kh002 Wenglor and Wenglor Photoelectric Sensor often helps compare reliability, cost, and availability.
Wenglor P1NH401 Photoelectric Sensor
The Wenglor P1NH401 Photoelectric Sensor offers 700 mm range, 10 ... 30 V DC supply voltage, 500 Hz, IP67/IP68, Push-pull, NPN, PNP output. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor PK Series.
| Brand | Wenglor |
| Product Type | Photoelectric Sensor |
| Model Number | P1NH401 |
Wenglor P1NH401 Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Range | 700 mm |
| Setting Range | 80 ... 700 mm |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Max. Ambient Light | 10,000 Lux |
| Supply voltage | 10 ... 30 V DC |
| Supply voltage with IO Link | 18 ... 30 V DC |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 500 Hz |
| Switching Frequency (interference-free mode) | 250 Hz |
| Response time (interference-free mode) | 2 ms |
| Response Time | 1 ms |
| Temperature Range | -40 ... 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Interface | IO-Link V1.1 |
| Setting Method | Single-turn |
| Housing Material | Plastic, ABS/PC |
| Connection | M12 × 1; 4-pin |
| Output | Push-pull, NPN, PNP |
| Circuit | Off-delay, On-delay, Mode of operation Hysteresis, Switching point, Emitted light |
| Optic Cover | Plastic, PMMA |
| Degree of Protection | IP67/IP68 |
| Weight | 30 g |
Obtain a Quote for Wenglor 700 mm Reflex Photoelectric Sensor P1NH401 at economical prices. Specifications Overview for P1NH401 reveals range of 700 mm, using a Red Light source with < 5 % switching hysteresis. It operates efficiently under a maximum ambient light of 10,000 Lux and requires a supply voltage of 10 ... 30 V DC (18 ... 30 V DC). The sensor's current consumption is < 30 mA. It features a high switching frequency of 500 Hz, reduced to 250 Hz in interference-free mode, with a response time of 1 ms-2 ms. Designed for extreme temperatures ranging from -40 ... 60 °C, it supports switching output voltage drops < 2 V, a 100 mA switching current, and interfaces with IO-Link V1.1. The Plastic, ABS/PC housing material with an M12 × 1; 4-pin connection and Push-pull, NPN, PNP output. The optic cover is Plastic, PMMA, and it meets IP67/IP68 protection standards.Take the First Step with a Quote for your requirement of Wenglor 700 mm Reflex Photoelectric Sensor. Our commitment to better pricing and exceptional support sets us apart from other Competitors.
