Home Wenglor Photoelectric Sensors Through-Beam Sensors P1NE201 Wenglor P1NE201 Photoelectric Sensor The Wenglor P1NE201 Photoelectric Sensor offers 60,000 mm range, Receiver sensor type, 10 ... 30 V DC supply voltage, IP67, IP68 degree of protection. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor Through-Beam Series .
Brand Wenglor Product Type Through-Beam Sensors Model Number P1NE201
Wenglor P1NE201 Photoelectric Sensor – Technical Specifications Specification Value Range 60,000 mm Light Source Red Light Service Life (T = +25 °C) 100,000 h Sensor Type Receiver Supply Voltage 10 ... 30 V DC Current Consumption (Ub = 24 V) < 30 mA Temperature Drift < 10 % Temperature Range -40 ... 60 °C Reverse Polarity Protection yes Protection Class III Housing Material Plastic, ABS/PC Degree of Protection IP67, IP68 Connection M12 × 1; 4-pin Optic Cover Plastic, PMMA Weight 30 g MTTFd (EN ISO 13849-1) 1,790.32 a Other parameters Off-delay
On-delay
Mode of operation
Hysteresis
Switching point Smallest Recognizable Part see Table 1 Switching Hysteresis 10 % Max. Ambient Light 10,000 Lux Supply Voltage with IO-Link 18 ... 30 V DC Switching Frequency 1,000 Hz Switching Frequency (interference-free mode) 500 Hz Response Time 0.5 ms Response time (interference-free mode) 1 ms Switching Output Voltage Drop < 2 V Switching Output/Switching Current 100 mA Residual Current Switching Output < 50 µA Short Circuit Protection yes Overload Protection yes Interface IO-Link V1.1 Setting Method Potentiometer IO-Link yes Output Push-pull
NPN
PNP Circuit inactive
Error output
NC
NC+NO
NO PNP NC, PNP NO yes
