If you’re not fully sure about OHD202A0103, taking a closer look at Sick Diffuse Sensor, Wenglor P1Kh006 and Wenglor Photoelectric Sensor often helps compare reliability, cost, and availability.
Wenglor OHD202A0103 Photoelectric Sensor
The Wenglor OHD202A0103 Photoelectric Sensor offers 200 mm range, 10 ... 30 V DC supply voltage, 1,000 Hz, IP67, PNP NC, PNP NO output. Manufactured by Wenglor under the Wenglor Photoelectric Sensor category, this model belongs to the Wenglor PK Series.
| Brand | Wenglor |
| Product Type | Photoelectric Sensor |
| Model Number | OHD202A0103 |
Wenglor OHD202A0103 Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Range | 200 mm |
| Setting Range | 35 ... 200 mm |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Max. Ambient Light | 10,000 Lux |
| Supply voltage | 10 ... 30 V DC |
| Supply voltage with IO Link | - |
| Current Consumption (Ub = 24 V) | < 30 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency (interference-free mode) | - |
| Response time (interference-free mode) | - |
| Response Time | 500 µs |
| Temperature Range | -25 ... 60 °C |
| Switching Output Voltage Drop | < 2.5 V |
| Switching Output/Switching Current | 200 mA |
| Interface | - |
| Setting Method | Potentiometer |
| Housing Material | Stainless steel, V2A (1.4305 / 303) |
| Connection | M12 × 1; 4-pin |
| Output | PNP NC, PNP NO |
| Circuit | NC NC+NO NO |
| Optic Cover | - |
| Degree of Protection | IP67 |
| Weight | 36 g |
IndMALL Automation Dealing offers Wenglor 200 mm Reflex Sensor OHD202A0103 at unbeatable prices. The Main Technical Parameters of OHD202A0103 features range of 200 mm with a switching hysteresis of < 5 %. It uses a Red Light source and can handle a maximum ambient light of 10,000 Lux
. The supply voltage ranges from 10 ... 30 V DC, with IO-Link operating at -. The current consumption at < 30 mA
. It has a switching frequency of 1,000 Hz and - in interference-free mode, with response times of 500 µs
and -, respectively. The sensor operates within a temperature range of -25 ... 60 °C. The switching output voltage drop is < 2.5 V
, and the switching current is 200 mA. It features an -. interface and a Potentiometer
setting method. The housing is made of Stainless steel, V2A (1.4305 / 303), with an M12 × 1; 4-pin connection. The output includes PNP NC, PNP NO circuits with various configurations, and the optic cover is made of -. The sensor is rated IP67. Take the First Step with a Quote for your requirement of Wenglor 200 mm Reflex Sensor. Choose us for unparalleled pricing and support over other Dealers & Distributors.
