If youβre not fully sure about TELEMECANIQUESENSORS-XMPB06B2131, taking a closer look at Telemecanique Limit Switch, Telemecanique Safety Interlock Switches Accessories and Telemecanique Electromechanical Pressure Sensor often helps compare reliability, cost, and availability.
Telemecanique XMPB06B2131 Electromechanical Pressure Sensor
Technical Specifications of Telemecanique Pressure Sensor XMPB06B2131:
| Controlled fluid | Air (0-70 Β°C), fresh water (0-70 Β°C), sea water (0-70 Β°C) |
| Materials in contact with fluid | Chromated zinc alloy |
| Pressure sensor name | XMP |
| IP degree of protection | IP54 conforming to IEC 60529 |
Telemecanique Electromechanical Pressure Sensor XMPB06B2131 Technical Specifications
| Specification | Value |
|---|---|
| Pressure sensor name | XMP |
| Fluid connection type | G 1/4 (female) conforming to ISO 228 |
| Controlled fluid | Air (0-70 Β°C), fresh water (0-70 Β°C), sea water (0-70 Β°C) |
| Cable entry | 2 entries tapped for Pg 13.5 cable gland conforming to NF C 68-300 |
| Contacts type and composition | 2 NC snap action |
| Product specific application | Not applicable |
| Pressure switch type of operation | Regulation between 2 thresholds |
| Electrical connection | Screw-clamp terminals, clamping capacity: minimum : 2 x 4 mmΒ² |
| Scale type | Adjustable differential |
| Setting | Nut |
| Local display | Without |
| Electrical circuit type | Power circuit |
| Materials in contact with fluid | Chromated zinc alloy |
| Enclosure material | PA impregnated with fibreglass |
| Operating position | Any position |
| Pressure actuator | Diaphragm |
| Terminal block type | 4 terminals |
| Operating rate | 10.0000 CYCLE_PER_MINUTE |
| Terminals description ISO nΒ°1 | (3-4)NC |
| Standards | IEC 60947-4-1 |
| Protective treatment | - |
| Electrical shock protection class | Class I conforming to IEC 60536 |
| IP degree of protection | IP54 conforming to IEC 60529 |
| Range of product | - |
| Type of decompression valve | Without |
| Control type | RESET knob |
| Resistance across terminals | 25 MOhm conforming to IEC 60255-7 category 3, 25 MOhm conforming to NF C 93-050 method A |
| Vibration resistance | 3 gn conforming to IEC 60068-2-6 (f = 10-500 Hz) |
| Shock resistance | 50 gn conforming to IEC 60068-2-27 |
Send Your Inquiry for Telemecanique XMPB06B2131 Electromechanical Pressure Sensor with cost-effective solutions. This sensor is designed with fluid connection G 1/4 (female) conforming to ISO 228 standards, ensuring compatibility with various applications. It features a pressure switch operation type with Regulation between 2 thresholds and an Adjustable differential scale for precision control.
It is equipped with 2 NC snap action contacts, Screw-clamp terminals, clamping capacity: minimum : 2 x 4 mmΒ², and 2 entries tapped for Pg 13.5 cable gland conforming to NF C 68-300 for secure connections. The pressure actuator features a Diaphragm, and the terminal block has 4 terminals for reliable operation. Capture the Best Deal with a Quote for your requirement of Telemecanique XMPB06B2131 Electromechanical Pressure Sensor. Our pricing and support are designed to exceed the standards of other Traders & Suppliers.
