Many engineers reviewing Telemecanique TELEMECANIQUESENSORS-9012GRG4 also explore Telemecanique Limit Switch, Telemecanique Safety Interlock Switches Accessories and Telemecanique Telemecaniquesensors 9012Ggw21, ensuring they donโt miss strong alternatives before finalizing procurement decisions.
Telemecanique 9012GRG4 Electromechanical Pressure Switch
Technical Specifications of Telemecanique Pressure Switch 9012GRG4:
| Pressure sensor type | Electromechanical pressure switch |
| 240 psi | Maximum pressure |
| Terminal block type | 4 screw terminals |
| NEMA degree of protection | NEMA 1 conforming to UL 50 |
Telemecanique Electromechanical Pressure Switch 9012GRG4 Technical Specifications
| Specification | Value |
|---|---|
| Pressure sensor type | Electromechanical pressure switch |
| Pressure sensor name | 9012G |
| Maximum pressure | 240 psi |
| Contacts type and composition | NC-NO, SPDT, Form C, snap action, silver nickel contacts |
| Controlled fluid | Hydraulic oil (-40-250 ยฐF), non-corrosive liquids (-40-250 ยฐF), air (-40-250 ยฐF), non-corrosive gas (-40-250 ยฐF) |
| Fluid connection type | 0.25 inch 18 NPTF conforming to UL 508 |
| Pressure switch type of operation | Detection of 1 single threshold |
| Scale type | Fixed differential |
| Local display | Without |
| Cable entry | 0.5 inch NPT conduit entrance |
| Terminal block type | 4 screw terminals |
| Electrical connection | Screw-clamp terminals, AWG 22...AWG 12 |
| Electrical circuit type | Control circuit |
| Local signalling | Without: |
| Setting | Internal |
| Enclosure material | Thermoplastic |
| Pressure actuator | Diaphragm nitrile (Buna-N) |
| Operating position | Any position |
| Materials in contact with fluid | Nitrile (Buna-N) |
| Operating rate | 120 cyc/mn |
| Vibration resistance | 2 gn (f= 40-150 Hz) conforming to IEC 68-2-6 |
| Shock resistance | 50 gn conforming to IEC 58-2-27 |
| NEMA degree of protection | NEMA 1 conforming to UL 50 |
Reach Us by Email for Telemecanique 9012GRG4 Electromechanical Pressure Switch at Discounted Rates. This switch features a maximum pressure capacity of 240 psi and operates with a Detection of 1 single threshold. It has an Fixed differential scale and uses NC-NO, SPDT, Form C, snap action, silver nickel contacts for reliable performance.
Key specifications include fluid connection 0.25 inch 18 NPTF conforming to UL 508 standards, an 4 screw terminals block, and Screw-clamp terminals, AWG 22...AWG 12 wires. The cable entry is a 0.5 inch NPT conduit entrance, and the Diaphragm nitrile (Buna-N) Pressure actuator, with Thermoplastic insulation for contact durability. It also features Nitrile (Buna-N) materials for fluid contact and an operating rate of 120 cyc/mn. Navigate Your Needs with a Quote for your requirement of Telemecanique 9012GRG4 Electromechanical Pressure Switch. Our pricing and support are unrivaled, especially when compared to other Competitors.
