Telemecanique 9012GFW22K1 Electromechanical Pressure Switch
Technical Specifications of Telemecanique Pressure Switch 9012GFW22K1:
| Pressure sensor type | Electromechanical pressure switch |
| 15000 psi | Maximum pressure |
| Terminal block type | 8 screw terminals |
| NEMA degree of protection | NEMA 4/4X/13 conforming to UL 50 |
Telemecanique Electromechanical Pressure Switch 9012GFW22K1 Technical Specifications
| Specification | Value |
|---|---|
| Pressure sensor type | Electromechanical pressure switch |
| Pressure sensor name | 9012G |
| Maximum pressure | 15000 psi |
| Contacts type and composition | 2(NC-NO), DPDT-DB, Form ZZ, snap action, silver nickel contacts |
| Controlled fluid | Hydraulic oil (-15-250 Β°F), non-corrosive liquids (-15-250 Β°F), air (-15-250 Β°F), non-corrosive gas (-15-250 Β°F) |
| Fluid connection type | 0.25 inch 18 NPTF conforming to UL 508 |
| Pressure switch type of operation | Detection of 1 single threshold |
| Scale type | Fixed |
| Local display | Without |
| Cable entry | 0.5 inch NPT conduit entrance |
| Terminal block type | 8 screw terminals |
| Electrical connection | Screw-clamp terminals, AWG 22...AWG 12 |
| Electrical circuit type | Control circuit |
| Local signalling | Without: |
| Setting | External |
| Enclosure material | Die cast aluminium alloy 380 |
| Pressure actuator | Piston |
| Operating position | Any position |
| Materials in contact with fluid | Viton fluorocarbon |
| Operating rate | 120 cyc/mn |
| Vibration resistance | 2 gn (f= 40-150 Hz) conforming to IEC 68-2-6 |
| Shock resistance | 50 gn conforming to IEC 58-2-27 |
| NEMA degree of protection | NEMA 4/4X/13 conforming to UL 50 |
Get A Quote for Telemecanique 9012GFW22K1 Electromechanical Pressure Switch at unbeatable prices. This switch features a maximum pressure capacity of 15000 psi and operates with a Detection of 1 single threshold. It has an Fixed scale and uses 2(NC-NO), DPDT-DB, Form ZZ, snap action, silver nickel contacts for reliable performance.
Key specifications include fluid connection 0.25 inch 18 NPTF conforming to UL 508 standards, an 8 screw terminals block, and Screw-clamp terminals, AWG 22...AWG 12 wires. The cable entry is a 0.5 inch NPT conduit entrance, and the Piston Pressure actuator, with Die cast aluminium alloy 380 insulation for contact durability. It also features Viton fluorocarbon materials for fluid contact and an operating rate of 120 cyc/mn. Match Your Needs with a Quote for your requirement of Telemecanique 9012GFW22K1 Electromechanical Pressure Switch. Our pricing and support are unrivaled, especially when compared to other Distributors.
