Many engineers reviewing Telemecanique TELEMECANIQUESENSORS-9012GDWM4Y1 also explore Telemecanique Limit Switch, Telemecanique Safety Interlock Switches Accessories and Telemecanique Telemecaniquesensors 9012Ggw21, ensuring they donโt miss strong alternatives before finalizing procurement decisions.
Telemecanique 9012GDWM4Y1 Electromechanical Pressure Switch
Technical Specifications of Telemecanique Pressure Switch 9012GDWM4Y1:
| Pressure sensor type | Electromechanical pressure switch |
| 240 psi | Maximum pressure |
| Terminal block type | 4 screw terminals |
| NEMA degree of protection | NEMA 4/4X/13 conforming to UL 50 |
Telemecanique Electromechanical Pressure Switch 9012GDWM4Y1 Technical Specifications
| Specification | Value |
|---|---|
| Pressure sensor type | Electromechanical pressure switch |
| Pressure sensor name | 9012G |
| Maximum pressure | 240 psi |
| Contacts type and composition | NC-NO, SPDT-DB, Form Z, snap action, silver nickel contacts |
| Controlled fluid | Hydraulic oil (-40-250 ยฐF), selected corrosive gases (-40-250 ยฐF), air (-40-250 ยฐF), non-corrosive gas (-40-250 ยฐF) |
| Fluid connection type | 0.25 inch BS2779 parallel pipe thread conforming to UL 508 |
| Pressure switch type of operation | Detection of 1 single threshold |
| Scale type | Fixed |
| Local display | Without |
| Cable entry | 20 mm BS4568 conduit entrance |
| Terminal block type | 4 screw terminals |
| Electrical connection | Screw-clamp terminals, AWG 22...AWG 12 |
| Electrical circuit type | Control circuit |
| Local signalling | Without: |
| Setting | Internal |
| Enclosure material | Die cast aluminium alloy 380 |
| Pressure actuator | Diaphragm nitrile (Buna-N) |
| Operating position | Any position |
| Materials in contact with fluid | Viton fluorocarbon |
| Operating rate | 120 cyc/mn |
| Vibration resistance | 2 gn (f= 40-150 Hz) conforming to IEC 68-2-6 |
| Shock resistance | 50 gn conforming to IEC 58-2-27 |
| NEMA degree of protection | NEMA 4/4X/13 conforming to UL 50 |
Give Us a Call for Telemecanique 9012GDWM4Y1 Electromechanical Pressure Switch at the lowest pricing. This switch features a maximum pressure capacity of 240 psi and operates with a Detection of 1 single threshold. It has an Fixed scale and uses NC-NO, SPDT-DB, Form Z, snap action, silver nickel contacts for reliable performance.
Key specifications include fluid connection 0.25 inch BS2779 parallel pipe thread conforming to UL 508 standards, an 4 screw terminals block, and Screw-clamp terminals, AWG 22...AWG 12 wires. The cable entry is a 20 mm BS4568 conduit entrance, and the Diaphragm nitrile (Buna-N) Pressure actuator, with Die cast aluminium alloy 380 insulation for contact durability. It also features Viton fluorocarbon materials for fluid contact and an operating rate of 120 cyc/mn. Elevate Your Project with a Quote for your requirement of Telemecanique 9012GDWM4Y1 Electromechanical Pressure Switch. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
Related Products
