Home Brands Sick Contrast Sensors KTM-WP1A282V Sick KTM-WP1A282V Contrast Sensor The Sick KTM-WP1A282V Contrast Sensor offers Small, stainless steel, design ≤ 11 mm sensing distance , 12 V DC ... 24 V DC supply voltage, PNP Output Cable with M12 male connector, 4-pin, 0.2 m; Cable with M12 male connector, 4-pin, 0.2 m connection . Manufactured by Sick under the Sick Contrast Sensor category, this model belongs to the KT Series.
Brand Sick Product Type Contrast Sensor Model Number KTM-WP1A282V
Sick KTM-WP1A282V Contrast Sensor – Technical Specifications Specification Value Dimensions (W x H x D) 15.25 mm x 48.6 mm x 22.2 mm Sensing distance ≤ 11 mm Sensing distance tolerance ± 3 mm Housing design Small, stainless steel Light source LED, RGB Wave length 470 nm, 525 nm, 625 nm Light emission Long side of housing Light spot size 1.6 mm x 9.5 mm Light spot direction Vertical Teach-in mode 2-point teach-in static/dynamic + proximity to markET: Teach-in dynamic Supply voltage 12 V DC ... 24 V DC Ripple ≤ 5 Vpp Current consumption < 50 mA 3) Switching frequency 15 kHz 4) Response time 35 µs 5) Jitter 15 µs Switching output PNP Switching output (voltage) PNP: HIGH = UV ≤ 2 V / LOW approx. 0 V Output current Imax. 50 mA 6) Retention time (ET) 28 ms, non-volatile memory Time delay Switch-off delay, 32 ms Connection type Cable with M12 male connector, 4-pin, 0.2 m; Cable with M12 male connector, 4-pin, 0.2 m Protection class III Enclosure rating IP69K Weight 40 g Housing material ABS Optics material PMMA Ambient operating temperature –30 °C ... +70 °C Ambient temperature, storage –30 °C ... +75 °C
