Sick DFS60B-THPA10000 - Incremental Encoder
Sick DFS60B-THPA10000 incremental encoder delivers 10,000 pulses per revolution, TTL/HTL output, through hollow shaft, and 600 kHz frequency capability. This Sick Sick Encoder from the series supports 4.5–32 V supply voltage, 6-channel signals, M23 12-pin connector, ≤ 6,000 min⁻¹ operating speed, aluminum die-cast housing, stainless steel 15 mm hollow shaft, and –40 °C to +100 °C operating temperature range.
| Brand | Sick |
| Product Type | Incremental Encoder |
| Model Number | DFS60B-THPA10000 |
Sick DFS60B-THPA10000 Incremental Encoder - Technical Specifications
| Specification | Value |
|---|---|
| Pulses per revolution | 10,000 1) |
| Measuring step | 90°, electric/pulses per revolution |
| Error limits | ± 0.05° |
| Communication interface | Incremental |
| Communication Interface detail | TTL / HTL |
| Factory setting | Factory setting: output level TTL |
| Number of signal channels | 6-channel |
| Initialization time | 32 ms, 30 ms 1) |
| Output frequency | ≤ 600 kHz |
| Load current | ≤ 30 mA |
| Power consumption | ≤ 0.7 W (without load) |
| Connection type | Male connector, M23, 12-pin, radial |
| Supply voltage | 4.5 ... 32 V |
| Mechanical design | Through hollow shaft |
| Shaft diameter | 15 mm |
| Shaft material | Stainless steel |
| Flange material | Aluminum |
| Housing material | Aluminum die cast |
| Start up torque | 0.8 Ncm (+20 °C) |
| Operating torque | 0.6 Ncm (+20 °C) |
| Operating speed | ≤ 6,000 min⁻¹ 1) |
| Moment of inertia of the rotor | 40 gcm² |
| Bearing lifetime | 3.6 x 10^10 revolutions |
| Angular acceleration | ≤ 500,000 rad/s² |
| Operating temperature range | –40 °C ... +100 °C 2)–30 °C ... +100 °C 3) |
| Storage temperature range | –40 °C ... +100 °C, without package |
The DFS60B-THPA10000 incremental encoder is a Sick encoder used for rotational speed and position feedback in industrial automation. This DFS60B-THPA10000 incremental encoder provides 10,000 pulses per revolution, TTL/HTL incremental signals, and a through hollow shaft design for direct shaft mounting. Operating with ≤ 600 kHz output frequency and wide 4.5–32 V DC supply, it belongs to the DFS60 series and is integrated into encoder-based control systems across factories.
The DFS60B-THPA10000 incremental encoder is applied in conveyors, packaging machines, automated assembly lines, and material handling equipment. Its stable incremental output supports accurate speed monitoring and position tracking for motors and rotating mechanisms. The hollow shaft structure simplifies installation, while consistent signal transmission enables reliable operation in continuous-duty industrial environments where synchronization and repeatability are required.
The Sick DFS60B-THPA10000 incremental encoder combines defined electrical performance with durable mechanical construction. With controlled torque values, long bearing lifetime, and aluminum housing, this incremental encoder supports dependable operation under industrial loads. As part of the DFS60 series from Sick, the DFS60B-THPA10000 incremental encoder is suitable for automation systems requiring precise, repeatable rotational feedback and long-term operational stability.
Related Products
