In most procurement cycles, ELECTRIC-ATV610U75N4 is considered with Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software, giving decision-makers confidence that they’ve chosen the most dependable component.
Schneider ATV610U75N4 Variable Speed Drive
The Schneider Altivar 610 7.5 kW VFD ATV610U75N4 is a compact Variable Frequency Drive built for precision control of industrial motors.
| Brand | Schneider |
| Product Type | VFD - Variable Frequency Drive |
| Model Number | ATV610U75N4 |
Schneider ATV610U75N4 Variable Speed Drive – Technical Specifications
| Specification | Value |
|---|---|
| Mounting mode | Cabinet mount |
| Height | 297 mm350 mm with EMC plate |
| Analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bitsAI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI2, AI3 software-configurable temperature probe or water level sensor |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
| Range of product | Easy Altivar 610 |
| Ambient air temperature for operation | -15…45 °C (without derating)45…60 °C (with derating factor) |
| Communication port protocol | Modbus serial |
| Operating position | Vertical +/- 10 degree |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog inputAQ1, AQ2: +/- 0.2 % for analog output |
| Product destination | Asynchronous motorsSynchronous motors |
| IP degree of protection | IP20 |
| number of preset speeds | 16 preset speeds |
| Line current | 14.7 A at 380 V (normal duty)12.8 A at 460 V (normal duty)11.3 A at 380 V (heavy duty)10.2 A at 460 V (heavy duty) |
| Braking to standstill | By DC injection |
| Number of Units in Package 2 | 6 |
| Analogue input number | 3 |
| Output voltage | <= power supply voltage |
| Analogue output type | Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bitsSoftware-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Refresh time | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Sampling duration | 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input2 ms +/- 0.5 ms (DI1...DI6)configurable - discrete input5 ms +/- 1 ms (DI5, DI6)configurable - pulse input10 ms +/- 1 ms (AQ1, AQ2) - analog output |
| Depth | 203 mm |
| Acceleration and deceleration ramps | S, U or customizedLinear adjustable separately from 0.01 to 9000 s |
| Product specific application | Fan, pump, compressor, conveyor |
| Continuous output current | 15.8 A at 4 kHz for normal duty12.7 A at 4 kHz for heavy duty |
| Apparent power | 10.2 kVA at 460 V (normal duty)8.1 kVA at 460 V (heavy duty) |
| Product or component type | Variable speed drive |
| Width | 145 mm |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Maximum transient current | 17.4 A during 60 s (normal duty)19.1 A during 60 s (heavy duty) |
| Physical interface | 2-wire RS 485 for Modbus serial |
| EMC filter | Integrated conforming to IEC 61800-3 category C3 with 50 m |
| Discrete input type | DI1...DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhmDI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Ambient air temperature for storage | - |
| Noise level | 56 dB conforming to 86/188/EEC |
| Relay output number | 3 |
| Discrete input logic | Positive logic (source): DI1...DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)Negative logic (sink): DI1...DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1)Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1) |
| Connector type | 1 RJ45 (on the remote graphic terminal) for Modbus serial |
| Relay Output Type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Net Weight | 4.575 kg |
| Motor power hp | 10 hp for normal duty7.5 hp for heavy duty |
| Electrical connection | Control, screw terminal: 0.5...1.5 mm²Line side, screw terminal: 2.5...16 mm²Motor, screw terminal: 2.5...16 mm² |
| Transmission frame | RTU for Modbus serial |
| Maximum switching current | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Analogue output number | 2 |
| Switching frequency | 2...12 kHz adjustable |
| Motor power kW | 7.5 kW for normal duty5.5 kW for heavy duty |
| Supply frequency | 50...60 Hz +/-5 % |
| Output frequency | 0.1…500 Hz |
| Protection type | Thermal protection: motorMotor phase break: motorThermal protection: driveOverheating: driveOvercurrent between output phases and earth: driveOverload of output voltage: driveShort-circuit protection: driveMotor phase break: driveOvervoltages on the DC bus: driveLine supply overvoltage: driveLine supply undervoltage: driveLine supply phase loss: driveOverspeed: driveBreak on the control circuit: drive |
| Type of cooling | Forced convection |
The Schneider ATV610U75N4 is a compact VFD from the Altivar 610 range, engineered for 7.5kW motor control in pumps, fans, conveyors, and compressors—delivering efficient speed/torque regulation, lower energy use, and reliable operation for industrial automation teams.
Built for day-to-day plant reliability, the ATV610U75N4 delivers 7.5kW (10HP) in normal duty and 5.5kW (7.5HP) in heavy duty with a continuous output of 15.8A at 4kHz and transient handling to 19.1A for 60s. The cabinet-mount drive is IP20 rated and compact (H 297mm, W 145mm, D 203mm, 4.575kg), operates from −15…60°C and up to 95% RH, and uses forced-convection cooling with a low 56dB acoustic profile. Engineers get precise control via 0.1…500Hz output frequency, 2…12kHz switching frequency, 16 preset speeds, and independently adjustable ramps (0.01…9000s). Three analog inputs (0–10V / 0–20mA), two analog outputs, and six digital inputs support closed-loop tasks, while RS-485 Modbus RTU with RJ45 enables easy PLC/SCADA integration. An integrated EMC filter (IEC61800-3 CatC3) and comprehensive protections—thermal, overcurrent, short-circuit, over/undervoltage, phase loss, overspeed—make this Schneider drive a dependable choice for critical equipment uptime.
For buyers and specifiers, the Schneider Altivar 610 7.5kW VFD offers proven efficiency, simple commissioning, and long service life—ideal for modernizing legacy panels or standardizing across OEM builds. Review the ATV610U75N4 datasheet and ATV610U75N4 manual for wiring and parameter details, or check the latest ATV610U75N4 price. When your application calls for a compact, network-ready controller, the ATV610U75N4 is the smart, scalable pick—and a solid anchor keyword for schneider altivar vfd, altivar 610, and altivar 7.5kW search intent.
Related Products
