During technical comparisons, ELECTRIC-ATV610U55N4 appears alongside Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software so engineers assess signal types, ingress protection, and ambient tolerances accurately.
Schneider ATV610U55N4 Variable Speed Drive
Looking to purchase the Schneider ATV610U55N4 5.5 kW VFD for your industrial motor control needs? This high-performance Variable Frequency Drive (VFD) from the Easy Altivar 610 series is designed to operate three-phase asynchronous and synchronous motors with superior efficiency and precise speed regulation.
| Brand | Schneider |
| Product Type | VFD - Variable Frequency Drive |
| Model Number | ATV610U55N4 |
Schneider ATV610U55N4 Variable Speed Drive – Technical Specifications
| Specification | Value |
|---|---|
| Mounting mode | Cabinet mount |
| Height | 297 mm350 mm with EMC plate |
| Analogue input type | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bitsAI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI2, AI3 software-configurable temperature probe or water level sensor |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
| Range of product | Easy Altivar 610 |
| Ambient air temperature for operation | -15…45 °C (without derating)45…60 °C (with derating factor) |
| Communication port protocol | Modbus serial |
| Operating position | Vertical +/- 10 degree |
| Linearity error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog inputAQ1, AQ2: +/- 0.2 % for analog output |
| Product destination | Asynchronous motorsSynchronous motors |
| IP degree of protection | IP20 |
| number of preset speeds | 16 preset speeds |
| Line current | 11.6 A at 380 V (normal duty)10.5 A at 460 V (normal duty)8.9 A at 380 V (heavy duty)7.9 A at 460 V (heavy duty) |
| Braking to standstill | By DC injection |
| Number of Units in Package 2 | 6 |
| Analogue input number | 3 |
| Output voltage | <= power supply voltage |
| Analogue output type | Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bitsSoftware-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Refresh time | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Sampling duration | 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input2 ms +/- 0.5 ms (DI1...DI6)configurable - discrete input5 ms +/- 1 ms (DI5, DI6)configurable - pulse input10 ms +/- 1 ms (AQ1, AQ2) - analog output |
| Depth | 203 mm |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.01 to 9000 sS, U or customized |
| Product specific application | Fan, pump, compressor, conveyor |
| Continuous output current | 12.7 A at 4 kHz for normal duty9.3 A at 4 kHz for heavy duty |
| Apparent power | 8.4 kVA at 460 V (normal duty)6.3 kVA at 460 V (heavy duty) |
| Product or component type | Variable speed drive |
| Width | 145 mm |
| Supply | External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Maximum transient current | 14 A during 60 s (normal duty)14 A during 60 s (heavy duty) |
| Physical interface | 2-wire RS 485 for Modbus serial |
| EMC filter | Integrated conforming to IEC 61800-3 category C3 with 50 m |
| Discrete input type | DI1...DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhmDI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V) |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Ambient air temperature for storage | - |
| Noise level | 55 dB conforming to 86/188/EEC |
| Relay output number | 3 |
| Discrete input logic | Positive logic (source): DI1...DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)Negative logic (sink): DI1...DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1)Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1) |
| Connector type | 1 RJ45 (on the remote graphic terminal) for Modbus serial |
| Relay Output Type | Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cycles |
| Net Weight | 4.575 kg |
| Motor power hp | 7.5 hp for normal duty5 hp for heavy duty |
| Electrical connection | Control, screw terminal: 0.5...1.5 mm²Line side, screw terminal: 2.5...16 mm²Motor, screw terminal: 2.5...16 mm² |
| Transmission frame | RTU for Modbus serial |
| Maximum switching current | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC |
| Pollution degree | 2 conforming to IEC 61800-5-1 |
| Analogue output number | 2 |
| Switching frequency | 2...12 kHz adjustable |
| Motor power kW | 5.5 kW for normal duty4 kW for heavy duty |
| Supply frequency | 50...60 Hz +/-5 % |
| Output frequency | 0.1…500 Hz |
| Protection type | Thermal protection: motorMotor phase break: motorThermal protection: driveOverheating: driveOvercurrent between output phases and earth: driveOverload of output voltage: driveShort-circuit protection: driveMotor phase break: driveOvervoltages on the DC bus: driveLine supply overvoltage: driveLine supply undervoltage: driveLine supply phase loss: driveOverspeed: driveBreak on the control circuit: drive |
| Type of cooling | Forced convection |
The Schneider ATV610U55N4 is a compact VFD from the Altivar 610 range, built for precise 5.5kW (7.5HP ND) motor control in pumps, fans, conveyors, and compressors—delivering efficient speed/torque regulation for industrial automation and plant uptime.
Engineered for everyday reliability, the ATV610U55N4 delivers 5.5kW (normal duty, 12.7A at 4kHz) and 4kW (heavy duty, 9.3A at 4kHz), handling 14A transient for 60s. The cabinet-mount design is IP20 with a small footprint (H 297mm / 350mm with EMC plate, W 145mm, D 203mm, 4.575kg) and operates from −15…60°C up to 95% RH. Control flexibility includes an output frequency of 0.1…500Hz, 2…12kHz switching, 16 preset speeds, and independent linear/S/U ramps from 0.01…9000s. Three analog inputs (0–10V / 0–20mA), two analog outputs, and six digital inputs (with pulse up to 30kHz) support both asynchronous and synchronous motors, while RS-485 Modbus RTU with RJ45 simplifies PLC/SCADA integration and remote diagnostics.
Trusted in utility rooms and production lines, this Schneider 5.5kW VFD integrates a C3-class EMC filter (IEC61800-3) and comprehensive protections—thermal (motor/drive), overcurrent, short-circuit, over/undervoltage, phase loss, overspeed, and DC-bus events—plus DC injection braking and three durable relay outputs (100,000 cycles) for interlocks and alarms. Low acoustic noise (~55dB) and straightforward screw-terminal wiring (control 0.5…1.5mm², power 2.5…16mm²) make commissioning fast and repeatable. For specifications, wiring, and parameter maps, see the ATV610U55N4 datasheet and ATV610U55N4 manual, or request the latest ATV610U55N4 price.
Related Products
