If you’re not fully sure about ELECTRIC-ATS480M10Y, taking a closer look at Lenze Drive, Schneider Modicon M580 PLC and Magelis HMI Software often helps compare reliability, cost, and availability.
ATS480M10Y - Schneider Altistart 480 Soft Starter 1000A
ATS480M10Y Schneider Altistart 480 Soft Starter 1000A is a powerful motor starting solution for large-scale industrial systems.
| Brand | Schneider |
| Product Type | VFD(Variable Frequency Drive) |
| Product | ATS480M10Y |
Schneider Altistart 480 Soft Starter 1000A ATS480M10Y Technical Specifications:
| Specification | Value |
|---|---|
| Range of Product | Altivar Soft Starter ATS480 |
| Motor power kW | 250.0 kW at 230 V in the motor supply line normal duty220.0 kW at 230 V in the motor supply line heavy duty500.0 kW at 400 V in the motor supply line normal duty400.0 kW at 400 V in the motor supply line heavy duty630.0 kW at 440 V in the motor supply line normal duty500.0 kW at 440 V in the motor supply line heavy duty630.0 kW at 500 V in the motor supply line normal duty500.0 kW at 500 V in the motor supply line heavy duty630.0 kW at 525 V in the motor supply line normal duty500.0 kW at 525 V in the motor supply line heavy duty900.0 kW at 660 V in the motor supply line normal duty710.0 kW at 660 V in the motor supply line heavy duty900.0 kW at 690 V in the motor supply line normal duty710.0 kW at 690 V in the motor supply line heavy duty355.0 kW at 230 V to the motor delta terminals heavy duty710.0 kW at 400 V to the motor delta terminals normal duty630.0 kW at 400 V to the motor delta terminals heavy duty |
| Rated operational current [Ie] | Normal duty: 1000.0 A (at <40 °C) |
| Torque control | TRUE |
| Rated insulation voltage [Ui] | 690 V |
| Minimum switching current | 100 mA at 12 V DC for relay outputs |
| Maximum switching current | Relay outputs 2 A at 250 V ACRelay outputs 2 A at 30 V DCRelay outputs |
| Power supply frequency | 50...60 Hz - 20...20 % |
| Method of access | Slave Modbus serial |
| Package weight | 136.0 kg |
| Discrete Output Type | (DQ1) programmable digital output <= 30 V (DQ2) programmable digital output <= 30 V |
| Analog Output Number | 1 |
| Maximum acceleration under vibratory load (during storage) | 15 m/s² at 200...500 Hz10 m/s² at 9...200 Hz |
| Device Short name | ATS480 |
| Net Weight | 115.0 kg |
| IP Degree protection | IP00 |
| Output Compatibility | Open collector level 1 PLC conforming to IEC 65A-68 |
| [Uc] control circuit voltage | 24 V DC |
| Relay output number | 3 |
| Discrete input logic | Programmable digital input at State 0: < 5 V |
| Communication port protocol | Modbus serial |
| Motor Power Hp | 350.0 hp at 208 V normal duty250.0 hp at 208 V heavy duty350.0 hp at 230 V normal duty300.0 hp at 230 V heavy duty800.0 hp at 460 V normal duty600.0 hp at 460 V heavy duty1000.0 hp at 575 V normal duty800.0 hp at 575 V heavy duty |
| Relay Output Type | Relay outputs R1A 1 NORelay outputs R1B 1 NORelay outputs RIC NO/NC programmable |
| Ambient air temperature for operation | 40…60 °C (with current derating of 2 % per °C)-15…40 °C (without derating) |
| data format | 8 bits, configurable odd, even or no parity |
| Pollution Degree | Level 3 |
| Ambient air temperature for storage | -25…70 °C |
| Relative Humidity | 0…95 % without condensation or dripping water conforming to IEC 60068-2-3 |
| Width | 770.0 mm |
| Ue power supply voltage | 208...690 V - 15...10 % |
| Connection Type | 1 RJ45 |
The ATS480M10Y offers precise torque control, 3 relay outputs, and 2 programmable digital outputs (≤30 V). Supporting a wide motor voltage range from 208 V to 690 V, it features Modbus serial communication over a standard RJ45 port. With 24 V DC control circuit voltage and compatibility with IEC 65A-68 standards, it seamlessly integrates with PLC-based automation panels.
The device is built to operate reliably in harsh industrial environments, with a vibration resistance of up to 15 m/s² and storage capacity down to -25°C. It features an IP00 protection rating, weighs 115 kg net, and has a width of 770 mm for panel-friendly installation. Switching current ranges from 100 mA (min) to 2 A (max), offering flexible I/O configuration for diverse applications.
Industries such as mining, cement, power, and water treatment benefit from the Schneider ATS480M10Y's ability to reduce electrical stress on motors while ensuring energy efficiency. Whether connected in delta or line configurations, it supports both normal and heavy-duty modes across various voltage levels. For the best price on the ATS480M10Y Schneider Altistart 480 Soft Starter, contact IndMALL today. Get technical support, verified vendor connections, and prompt delivery tailored to your project requirements.
Related Products
