In sourcing discussions, AES-1155 is often placed next to Schmersal Limit Switch, Schmersal Aes 1135 and Schmersal Door Locking Devices so procurement teams can align budgets and technical requirements effectively.
Schmersal AES 1155 Safe Signal Processing
The Schmersal AES 1155 Safe Signal Processing (Item No: 101170041) offers a 20,000,000 Operations mechanical life, minimum, 0.25 mm² cable section, minimum, IP40 degree of protection of the enclosure, 24 VDC rated operating voltage. Manufactured by Schmersal under the Schmersal Safe Signal Processing. category, this model belongs to the Schmersal AES Series.
| Brand | Schmersal |
| Product Type | Safe Signal Processing |
| Model Number | AES 1155 |
Schmersal AES 1155 Safe Signal Processing – Technical Specifications
| Specification | Value |
|---|---|
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| Number of LEDs | 1 |
| Number of normally closed (NC) | 2 |
| Number of normally open (NO) | 2 |
| Number of undelayed semi-conductor outputs with signaling function | 2 |
| Number of safety contacts | 1 |
| Performance Level, up to | d |
| Relay outputs - Category | 3 |
| PFH value | 1.00 x 10⁻⁷ /h |
| Relay outputs - Notice | for max. 50,000 switching cycles/year and max. 80% contact load |
| Safety Integrity Level (SIL), suitable for applications in | 2 |
| Mission time | 20 Year(s) |
| Mechanical life, minimum | 20,000,000 Operations |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Terminal designations | IEC/EN 60947-1 |
| Termination | rigid or flexibleScrew terminals M20 x 1.5 |
| Cable section, minimum | 0.25 mm² |
| Cable section, maximum | 2.5 mm² |
| Tightening torque of Clips | 0.6 Nm |
| Width | 22.5 mm |
| Height | 100 mm |
| Depth | 121 mm |
| Degree of protection of the enclosure | IP40 |
| Degree of protection of the mounting space | IP54 |
| Degree of protection of clips or terminals | IP20 |
| Storage and transport temperature | -25 ... +70 °C |
| Resistance to vibrations | 10...55 Hz, Amplitude 0.35 mm, ± 15 % |
| Restistance to shock | 30 g / 11 ms |
| Rated impulse withstand voltage Uimp | 4 kV |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Frequency range | 50 Hz60 Hz |
| Operating voltage | 24 VAC -15 % / +10 %24 VDC -10 % / +20 % |
| Ripple voltage | 10 % |
| Thermal test current | 6 A |
| Rated operating voltage | 24 VDC |
| Rated AC voltage for controls, 50 Hz, minimum | 20.4 VAC |
| Rated control voltage at AC 50 Hz, maximum | 26.4 VAC |
| Rated AC voltage for controls, 60 Hz, minimum | 20.4 VAC |
| Rated control voltage at AC 60 Hz, maximum | 26.4 VAC |
| Rated AC voltage for controls at DC minimum | 20.4 VDC |
| Rated control voltage at DC, maximum | 26.4 VAC |
| Electrical power consumption | 5 W |
| Contact resistance, maximum | 0.1 Ω |
| Electrical data - Note (Contact resistance) | in new state |
| Drop-out delay in case of power failure, typically | 80 ms |
| Drop-out delay in case of emergency, typically | 20 ms |
| Pull-in delay at automatic start, maximum, typically | 100 ms |
| Pull-in delay at RESET, typically | 20 ms |
| Material of the contacts, electrical | Ag-Ni 10 and 0.2 µm gold-plated |
| Voltage, Utilisation category AC-15 | 230 VAC |
| Current, Utilisation category AC-15 | 6 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 6 A |
| Switching capacity, minimum | 10 mA |
| Switching capacity, maximum | 8 A |
| Input signal, HIGH Signal "1" | 10 … 30 VDC |
| Input signal, LOW Signal "0" | 0 … 2 VDC |
| Conduction resistance, maximum | 40 Ω |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.1 A |
| Switching capacity, maximum | 2 A |
| EMC rating | EMC-Directive |
Get A Quote for Schmersal Safe Signal Processing AES 1155 Item No: 101170041 at the best price. Here are the brief Technical Specifications of AES 1155, 101170041 are housing is made of Glass-fibre reinforced thermoplastic, ventilated design, ensuring structural integrity and thermal resistance. Termination is achieved via rigid or flexibleScrew terminals M20 x 1.5, supporting cable sections from 0.25 mm² to 2.5 mm². The tightening torque for clips is rated at 0.6 Nm, ensuring secure electrical connections. Compact in size, the unit measures 22.5 mm in width, 100 mm in height, and 121 mm in depth. Terminal clips are rated IP20, providing basic protection against solid objects. Designed to withstand harsh conditions, the unit operates reliably in storage and transport temperatures between -25 ... +70 °C. It resists vibrations of 10...55 Hz, Amplitude 0.35 mm, ± 15 % and shock up to 30 g / 11 ms. The rated impulse withstanding voltage (Uimp) is 4 kV. It's Time to get a Quote for your requirement of Safe Signal Processing AES 1155. We guarantee unmatched pricing and unparalleled support compared to other Distributors.
