Phoenix PLC-RSC- 24DC/ 1- 1/ACT Relay Module
The Phoenix PLC-RSC- 24DC/ 1- 1/ACT Relay Module (Part No: 2967109 ) offers a 24 V DC nominal input voltage UN, 20.2 V DC ... 33.6 V DC (20 °C) input voltage range, polarized Drive, 8 ms typical response time. Manufactured by Phoenix under the Phoenix Relay Module category, this model belongs to the Phoenix PLC Series.
| Brand | Phoenix Contact |
| Product Type | Relay Module |
| Model Number | PLC-RSC- 24DC/ 1- 1/ACT |
Phoenix PLC-RSC- 24DC/ 1- 1/ACT Relay Module – Technical Specifications
| Specification | Value |
|---|---|
| Product type | Relay Module |
| Product family | PLC-INTERFACE |
| Application | Output function |
| Mechanical service life | 3x 107 cycles |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
| Maximum power dissipation for nominal condition | 0.43 W |
| Test voltage (Winding/contact) | 4 kVrms (50 Hz, 1 min.) |
| Test voltage (Changeover contact/changeover contact) | - |
| Rated surge voltage | 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths) |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 20.2 V DC ... 33.6 V DC (20 °C) |
| Drive and function | monostable |
| Drive (polarity) | polarized |
| Typical input current at UN | 18 mA |
| Typical response time | 8 ms |
| Typical release time | 10 ms |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Operating voltage display | Yellow LED |
| Contact switching type | 2 N/O contacts |
| Type of switch contact | Single contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Limiting continuous current | 6 A |
| Maximum inrush current | 25 A (20 ms) |
| Min. switching current | 10 mA (5 V) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
| Switching capacity | 2 A (24 V (DC13)) |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 26 ... 14 |
| Tightening torque | 0.6 Nm ... 0.8 Nm |
| Width | 14 mm |
| Height | 80 mm |
| depth | 94 mm |
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | V0 (Housing) |
| Degree of protection (Relay) | RT III |
| Degree of protection (Relay base) | IP20 |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Temperature | D |
| Humidity | A |
| Vibration | B/C |
| EMC | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Electromagnetic compatibility | Conformance with EMC directive |
| Standards/regulations | IEC 60947-5-1 |
| Mounting Type | DIN rail mounting |
| Mounting position | any |
| Contact Connection type | - |
| Output fuse | - |
| Degree of protection (Installation location) | ≤ IP54 |
The Phoenix Contact Relay Module PLC-RSC-24DC/1-1/ACT (2967109) is designed for dependable performance in advanced automation environments. As part of the trusted PLC-INTERFACE family, this compact module ensures consistent switching accuracy for output functions and signal control. Operating at a nominal voltage of 24V DC with an input range from 20.2V DC to 33.6V DC, it consumes a typical current of 18 mA for efficient operation. Equipped with two N/O contacts made of AgNi material, it provides reliable conductivity with a mechanical life of 3×10⁷ cycles. The unit features reverse polarity protection, Varistor surge suppression, and reinforced insulation, ensuring electrical safety in harsh industrial conditions. With dimensions of 14 mm width, 80 mm height, and 94 mm depth, the module fits neatly in DIN rail-mounted enclosures. The PLC-RSC-24DC/1-1/ACT maintains a test voltage of up to 4 kVrms, minimal power dissipation of 0.43 W, and an operating temperature range between -40°C and 70°C, making it ideal for continuous use in industrial control systems.
The Phoenix Contact Relay Module PLC-RSC-24DC/1-1/ACT (2967109) is widely used in control panels, PLC outputs, and machine automation setups where reliable switching and safe isolation are essential. Its quick 8 ms response time and robust 24V DC drive enable precise control in real-time industrial processes. Maintenance engineers appreciate its screw-type terminals, allowing secure connections and easy servicing, while the built-in LED indicator simplifies operational diagnostics. Designed according to IEC 60947-5-1 and EMC standards, it meets international safety and performance requirements. Compact and durable, this Phoenix Contact Relay Module combines high endurance, efficient power use, and mechanical strength, making it a preferred choice for continuous industrial automation applications.
The PLC-RSC-24DC/1-1/ACT (2967109) from Phoenix Contact exemplifies high-quality relay performance in compact automation systems. The plc-rsc-24dc-1-1-act-2967109 ensures excellent electrical isolation, efficient switching, and long service life for industrial control circuits. The phoenix contact 2967109 model offers secure DIN rail mounting and dependable performance across automation networks. Designed for industrial reliability, the plc-rsc-24dc/1/1/act provides consistent operation under demanding electrical loads. Engineers and industrial buyers trust the Phoenix Contact Relay Module for its precision, energy efficiency, and robust design in modern automation environments.
