PLC-RPT-230UC/21HC/SO46: 1136242 - Phoenix Basic Insulation Relay Module
Technical Specifications of Phoenix Basic Insulation Relay Module PLC-RPT-230UC/21HC/SO46 1136242:
Spec | Value |
---|---|
Product type | Relay Module |
Nominal input voltage UN | 230 V AC |
Connection method | Push-in connection |
Mounting type | DIN rail mounting |
Phoenix Basic Insulation Relay Module PLC-RPT-230UC/21HC/SO46, 1136242 Technical Specifications:
Specification | Value |
---|---|
Product type | Relay Module |
Product family | PLC-INTERFACE |
Application | Filter to prevent interference |
Mechanical service life | approx. 3x 107 cycles |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 3 |
Maximum power dissipation for nominal condition | 2.3 W |
Test voltage (Winding/contact) | 4 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | - |
Rated surge voltage | 4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths) |
Nominal input voltage UN | 230 V AC |
Input voltage range | 179.4 V AC ... 264.5 V AC (20 °C) |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 8.5 mA (50 Hz) |
Typical response time | 7 ms |
Typical release time | 10 ms |
Protective circuit | RC element |
Operating voltage display | - |
Contact switching type | 1 changeover contact |
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Limiting continuous current | 6 A |
Maximum inrush current | 30 A (300 ms, N/O contact) |
Min. switching current | 10 mA (12 V) |
Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
Switching capacity | 2 A (DC13, 24 V) |
Connection method | Push-in connection |
Stripping length | 10 mm |
Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG | 26 ... 14 |
Tightening torque | - |
Width | 14 mm |
Height | 80 mm |
depth | 94 mm |
Color | gray (RAL 7042) |
Flammability rating according to UL 94 | - |
Degree of protection (Relay) | RT II (Relay) |
Degree of protection (Relay base) | IP20 (Relay base) |
Ambient temperature (operation) | -40 °C ... 55 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Temperature | D |
Humidity | A |
Vibration | B/C |
EMC | B |
Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Low Voltage Directive | Conformance with Low Voltage Directive |
Electromagnetic compatibility | Conformance with EMC directive |
Standards/regulations | IEC 60947-5-1 |
Mounting Type | DIN rail mounting |
Mounting position | any |
Contact Connection type | - |
Output fuse | - |
Degree of protection (Installation location) | IP54 (Installation location) |
Call us for Phoenix Basic Insulation Relay Module PLC-RPT-230UC/21HC/SO46 part no: 1136242 at the best rates. Technical Attributes of PLC-RPT-230UC/21HC/SO46, 1136242 are Relay Module type and PLC-INTERFACE Product family a versatile solution for Filter to prevent interference applications. This relay module features a mechanical service life of approx. 3x 107 cycles, ensuring durability and reliability. With a maximum power dissipation of 2.3 W, it operates efficiently at a nominal input voltage of 230 V AC, within an input voltage range of 179.4 V AC ... 264.5 V AC (20 °C). The module has a typical input current of 8.5 mA (50 Hz) at UN, with a response time of 7 ms and a release time of 10 ms. It is equipped with a RC element for protection and includes 1 changeover contact made from Push-in connection Connection method. Unlock Exclusive Pricing with a Quote for your requirement of Phoenix Basic Insulation Relay Module. Trust in our ability to provide more advantageous pricing and dedicated support beyond other other Dealers.