Phoenix PLC-RPT-230UC/21-21/MS (2910523) | Inquire Now
+91 79955 44066 sales@indmall.in

PLC-RPT-230UC/21-21/MS: 2910523 - Phoenix Integrated Status LED Relay

Technical Specifications of Phoenix Integrated Status LED Relay PLC-RPT-230UC/21-21/MS 2910523:

SpecValue
Product typeRelay Module
Nominal input voltage UN230 V AC
Connection methodPush-in connection
Mounting typeDIN rail mounting

Phoenix Integrated Status LED Relay PLC-RPT-230UC/21-21/MS, 2910523 Technical Specifications:

SpecificationValue
Product typeRelay Module
Product familyPLC-INTERFACE
ApplicationPalm switch
Mechanical service life5x 106 cycles
InsulationSafe isolation, reinforced insulation
Overvoltage categoryIII
Pollution degree2
Maximum power dissipation for nominal condition1.15 W
Test voltage (Winding/contact)4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage6 kV
Nominal input voltage UN230 V AC
Input voltage range207 V AC ... 264.5 V AC (20 °C)
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN5 mA
Typical response time6 ms (220 V DC)
Typical release time10 ms (220 V DC)
Protective circuitBridge rectifier; Bridge rectifier
Operating voltage displayYellow LED
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current6 A
Maximum inrush current12 A (20 ms)
Min. switching current10 mA (12 V)
Interrupting rating (ohmic load) max.192 W (24 V DC)
Switching capacity1 A (24 V, DC13)
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque-
Width14 mm
Height80 mm
depth104 mm
Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Degree of protection (Relay)RT II (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Ambient temperature (operation)-20 °C ... 50 °C
Ambient temperature (storage/transport)-20 °C ... 85 °C
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board
Low Voltage DirectiveConformance with Low Voltage Directive
Electromagnetic compatibilityConformance with EMC directive
Standards/regulationsEN 50178
Mounting TypeDIN rail mounting
Mounting positionany
Contact Connection type-
Output fuse-
Degree of protection (Installation location)≥ IP54 (Installation location)
Mail Us for your needs in Phoenix Integrated Status LED Relay PLC-RPT-230UC/21-21/MS part no: 2910523 with budget-friendly prices. The Main Technical Parameters of PLC-RPT-230UC/21-21/MS, 2910523 inludce Relay Module type and PLC-INTERFACE Product family a versatile solution for Palm switch applications. This relay module features a mechanical service life of 5x 106 cycles, ensuring durability and reliability. With a maximum power dissipation of 1.15 W, it operates efficiently at a nominal input voltage of 230 V AC, within an input voltage range of 207 V AC ... 264.5 V AC (20 °C). The module has a typical input current of 5 mA at UN, with a response time of 6 ms (220 V DC) and a release time of 10 ms (220 V DC). It is equipped with a Bridge rectifier; Bridge rectifier for protection and includes 2 changeover contacts made from Push-in connection Connection method. Customize Your Experience with a Quote for your requirement of Phoenix Integrated Status LED Relay . Experience the difference with our competitive pricing and superior support over other Suppliers.