+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Phoenix PLC-OSC-120AC/300DC/ 1 Solid State Relay Module

The Phoenix PLC-OSC-120AC/300DC/ 1 Solid State Relay Module (Part No: 2980717 ) offers a 120 V ACnominal input voltage UN, 96 V AC ... 132 V AC input voltage range, 1 N/O contact contact switching type, electronic design of digital output. Manufactured by Phoenix under the Phoenix Solid State Relay Module category, this model belongs to the Phoenix PLC Series.

Phoenix Contact PLC-OSC-120AC/300DC/ 1 2980717
BrandPhoenix Contact
Product TypeSolid state relay Module
Model NumberPLC-OSC-120AC/300DC/ 1

Phoenix PLC-OSC-120AC/300DC/ 1 Solid State Relay Module – Technical Specifications

SpecificationValue
Product typeSolid-state relay module
Product familyPLC-INTERFACE
ApplicationWith integrated solid-state relay
Overvoltage categoryIII
Maximum power dissipation for nominal condition0.67 W
Test voltage (Input/output)-
Nominal input voltage UN120 V AC
Nominal voltage (plugged-in solid-state relay)-
Input voltage range in reference to UN0.8 ... 1.1
Input voltage range96 V AC ... 132 V AC
Switching threshold "0" signal in reference to UN≤ 0.4
Switching threshold "1" signal in reference to UN≥ 0.8
Typical input current at UN5.6 mA
Typical response time19 ms
Typical turn-off time6 ms
Operating voltage displayYellow LED
Protective circuitReverse polarity protection; Polarity protection diode
Transmission frequency10 Hz
Contact switching type1 N/O contact
Design of digital outputelectronic
Contact connection type-
Output voltage range12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current1 A (see derating curve)
Maximum inrush current-
Voltage drop at max. limiting continuous current< 500 mV
Output circuit-
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Tightening torque0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Width6.2 mm
Height80 mm
Depth95 mm
Colorgray (RAL 7042)
Ambient temperature (storage/transport)-40 °C ... 85 °C
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board
Mounting TypeDIN rail mounting
Mounting Positionany
Degree of Protection Relay-
Housing Material-
Output Resistor-
Give Us a Call for Phoenix 120 V AC SSR Relay PLC-OSC-120AC/300DC/ 1 part no: 2980717 at the lowest pricing. In-depth Technical Analysis of PLC-OSC-120AC/300DC/ 1, 2980717 feature Solid-state relay module type from the PLC-INTERFACE product family, designed for With integrated solid-state relay applications in industrial settings. This module operates at a nominal input voltage of 120 V AC, with an input voltage range from 96 V AC ... 132 V AC, making it versatile for various uses. The typical input current at UN is 5.6 mA ensuring efficient energy consumption. With a rapid response time of 19 ms, it provides quick and reliable switching, utilizing an 1 N/O contact for seamless operation. The digital output is electronic, designed to handle a limiting continuous current of 1 A (see derating curve), and features a low voltage drop of < 500 mV at maximum limiting current. The output circuit is a - design, ensuring secure and stable connections, with a Screw connection. Elevate Your Project with a Quote for your requirement of Phoenix 120 V AC SSR Relay. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.

Disclaimer: IndMALL serves solely as a platform connecting buyers and vendors. It does not participate in pricing, payment, or delivery of goods.
Buyers are advised to verify all details and deal directly with vendors before finalizing any transaction.