If you’re not fully sure about OPT-60DC-230AC-1, taking a closer look at SMPS Phoenix, Phoenix 2982100 and Phoenixcontact Phoenix Contact Industrial Ethernet Switches often helps compare reliability, cost, and availability.
Phoenix OPT-60DC/230AC/ 1 Solid State Relay
The Phoenix OPT-60DC/230AC/ 1 Solid State Relay (Part No: 2967963 ) offers a 54 V DC ... 66 V DC input voltage range, 24 V AC ... 253 V AC output voltage range, 0.75 A (see derating curve) limiting continuous current, RT III Degree of protection. Manufactured by Phoenix under the Phoenix Solid State Relay category, this model belongs to the Phoenix OPT Series.
| Brand | Phoenix Contact |
| Product Type | Single Solid State Relay |
| Model Number | OPT-60DC/230AC/ 1 |
Phoenix OPT-60DC/230AC/ 1 Solid State Relay – Technical Specifications
| Specification | Value |
|---|---|
| Product type | Solid State Relay |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Maximum power dissipation for nominal condition | 0.18 W |
| Test voltage (Input/output) | 2.5 kV (50 Hz, 1 min., input/output) |
| Nominal input voltage UN | 60 V DC |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Input voltage range | 54 V DC ... 66 V DC |
| Typical input current at UN | 3 mA |
| Typical response time | 9 ms (at UN) |
| Typical turn-off time | 700 µs (at UN) |
| Transmission frequency | 10 Hz |
| Contact switching type | 1 N/O contact |
| Design of digital output | electronic |
| Output voltage range | 24 V AC ... 253 V AC |
| Limiting continuous current | 0.75 A (see derating curve) |
| Maximum inrush current | 30 A (10 ms) |
| Voltage drop at max. limiting continuous current | < 1 V |
| Output circuit | 2-conductor floating, zero voltage switch |
| Protective circuit | RCV circuit; RCV circuit |
| Width | 5 mm |
| Height | 28 mm |
| Depth | 15 mm |
| Color | black (RAL 9005) |
| Degree of protection | RT III |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Identification | ISA-S71.04. G3 Harsh Group |
| Standards/regulations | IEC 60664 |
| Mounting position | any |
| Min. load current | 10 mA |
| Leakage current | < 1 mA (in off state) |
| Max. load value | 4.5 A2s |
| Phase angle cos phi min | 0.5 |
The Phoenix OPT-60DC/230AC/1 is a high-performance Single Solid-state Relay built for precision AC load switching using a 60 V DC input control. Designed for compact panels, it ensures silent and reliable automation in demanding environments.
Engineered by Phoenix Contact, the OPT-60DC/230AC/1 features a 3 mA input current and operates within a tight control range of 54 V DC to 66 V DC. With an output voltage range from 24 V AC to 253 V AC and 0.75 A continuous load handling, this 3 mA Input Current SSR Relay is ideal for noise-free switching. Its 30 A inrush current support, <1 V voltage drop, and zero voltage switch design make it both efficient and durable. The 2.5 kV test voltage ensures safe isolation, while the RCV protection circuit guards against electrical spikes. With IEC 60664 compliance and certification under ISA-S71.04 G3 Harsh Group, this compact 5 mm-wide relay is suitable for tough industrial environments. For more technical options, visit the Phoenix Relay collection or explore the full range on the Phoenix Contact brand page.
The OPT-60DC/230AC/1 is widely used in HVAC systems, building automation panels, and process control units that demand reliable AC switching from a DC signal. Its fast response time of 9 ms and turn-off time of 700 µs enable accurate control in time-sensitive industrial tasks. Maintenance engineers prefer it for systems where mechanical relays fall short due to wear or audible switching noise. The solid-state design ensures long-term reliability even under frequent cycles. When panel space is limited and dependable performance is a must, the Phoenix OPT-60DC/230AC/1 proves to be a valuable component in control cabinet designs.
