In most procurement cycles, FL-SWITCH-4004T-8POE-4SFP is considered with SMPS Phoenix, Fl Switch 2208 and Phoenixcontact Phoenix Contact Industrial Ethernet Switches, giving decision-makers confidence that they’ve chosen the most dependable component.
Phoenix FL SWITCH 4004T-8POE-4SFP Industrial Ethernet Switches
The Phoenix FL SWITCH 4004T-8POE-4SFP Power Supply (Part No: 1026922 ) offers a Screw connection method, 10/100/1000 Mbps transmission speed, 52 V DC ... 57 V DC (> 52 V DC for PoE+ or 60 W output recommended) supply voltage range, IP30 degree of protection. Manufactured by Phoenix under the Phoenix Industrial Ethernet Switches category, this model belongs to the Phoenix FL Series.
| Brand | Phoenix Contact |
| Product Type | Industrial Ethernet switches |
| Model Number | FL SWITCH 4004T-8POE-4SFP |
Phoenix FL SWITCH 4004T-8POE-4SFP Industrial Ethernet Switches
| Specification | Value |
|---|---|
| Width | 68 mm |
| Height | 170 mm |
| Depth | 152 mm |
| Housing material | Aluminum |
| Mounting type | DIN rail mounting |
| Connection method | Screw connection |
| Transmission speed | 10/100/1000 Mbps |
| Transmission length | 100 m |
| Signal LEDs | Data receive, link status |
| No. of channels | 8 (RJ45 ports) |
| Product type | Switch |
| MTTF | 14.8 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
| Article revision | 3 |
| Supply voltage (DC) | 55 V DC (redundant) |
| Supply voltage range | 52 V DC ... 57 V DC (> 52 V DC for PoE+ or 60 W output recommended) |
| Max. current consumption | 4.8 A (Maximum, nominal load) |
| Typical current consumption | 301 mA (US = 55 V DC) |
| Degree of protection | IP30 |
| Ambient temperature (operation) | -40 °C ... 75 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Noise emission | EN 61000-6-4 |
| Status display | LEDs: US1, US2 (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port |
The Phoenix Contact FL SWITCH 4004T-8POE-4SFP 1026922 is a compact, rugged Phoenix Managed PoE Switch built to power and connect multiple industrial Ethernet devices. It features 8 PoE-enabled RJ45 ports and 4 SFP slots, supporting 10/100/1000 Mbps transmission across copper and fiber. Designed for DIN rail mounting with screw connections, the device operates on a redundant 55 V DC power supply and supports full PoE+ power output when needed.
Built with a strong aluminum housing and protected by an IP30 rating, the switch performs reliably in environments ranging from -40°C to +75°C. Its typical current consumption is 301 mA, and LED indicators show status for power, alarms, PoE, and link activity, helping technicians monitor network performance. With an MTTF of 14.8 years and compliance with EMC Directive 2004/108/EC, it meets industry reliability and safety expectations. For more technical options from the brand, visit Phoenix Contact.
Industrial integrators prefer it for combining gigabit switching with PoE in compact cabinet layouts. Whether powering IP cameras, sensors, or HMI terminals, it eliminates the need for separate power lines and simplifies installation. Its ability to manage copper and fiber in the same switch is a major advantage in distributed networks.
For long-term reliable connectivity with integrated PoE distribution, the Phoenix Contact FL SWITCH 4004T-8POE-4SFP is a practical choice for factory and plant networks.
