| Note on application | Only for industrial use |
| Product type | Coupling relay |
| Product family | PSRmini |
| Application | Safe switch on |
| Output fuse | Class I, Div. 2, Groups A, B, C, D, T4 |
| Control | 1-channel |
| Mechanical service life | approx. 5x 107 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Recovery time | 1 s |
| Maximum power dissipation for nominal condition | 1.56 W |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | 6 kV/safe isolation (through protective impedance) |
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
| Rated control supply current IS | typ. 65 mA |
| Typ. starting time with Us | 30 ms (when controlled via A1) |
| Typical release time | 30 ms (when controlled via A1) |
| Operating voltage display | 1 x LED (yellow) |
| Contact switching type | 1 enabling current path |
| Contact material | AgNi, gold-flashed |
| Limiting continuous current | 5 A |
| Switching capacity | min. 1.5 W |
| Output fuse | 150 mA fast blow |
| pluggable | yes |
| Connection method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Width | 17.5 mm |
| Height | 117.4 mm |
| Depth | 114.5 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA |
| Safety Integrity Level (SIL) | 3 (15 % of total SIL) |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -20 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 65 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (operation) | 2g |
| Certificate | 11253-14 HH |
| Mounting type | DIN rail mounting |
| Mounting position | vertical or horizontal |
| Inrush current | min. 100 mA |
| Filter time | < 2 ms (Test pulse duration) |
| Protective circuit | Overload protection; Suppressor diode |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Designation | 24V/A2 |
| Status display | 1 x LED (green) |
| Output description | non-safety-related |
| Number of outputs | 1 (digital) |
| Switching frequency | max. 0.5 Hz |
| Identification | C, EMC2 |
| Assembly note | See derating curve |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Diagnostic supply voltage UD | 24 V DC -15 % / +10 % |
| Input current at UD | typ. 15 mA (24V/A2; depending on load M1 +100 mA) |
| Inrush current at UD | 2.5 A (24V/A2; for 10 µs) |
| Switching voltage | min. 15 V AC/DC (without diagnostics) |
| Voltage | 23 V DC |
| Current | max. 100 mA |
| Short-circuit protection | no |
| Error indication | 1 x LED (red) |
| Number of inputs | 3 |
| Current consumption | typ. 20 mA (Input TP1) |
| Installation location | IP 54 |
| Max. permissible overall conductor resistance | < 10 Ω (Max. line resistance in the event of a short circuit of the load between LO and NI (or LO' and NI')) |
| Diagnostic threshold | 20 Ω ... 18 kΩ (lower/upper) |
