| Note on application | Only for industrial use |
| Product type | Coupling relay |
| Product family | PSRmini |
| Application | Safe switch off |
| Output fuse | Class I, Zone 2, AEx ec nC IIC T4 Gc / Ex ec nC IIC T4 Gc |
| Control | 1 and 2 channel |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Recovery time | 500 ms |
| Maximum power dissipation for nominal condition | 1.86 W (at UB = 30 V DC, UBD = 30 V DC, IL = 9 A²) |
| Nominal operating mode | 100% operating factor |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV between all current paths and housing |
| Rated control circuit supply voltage US | 24 V DC -20 % / +25 % |
| Power consumption at US | typ. 0.77 W |
| Rated control supply current IS | typ. 25 mA |
| Typ. starting time with Us | 150 ms (when controlled via pins 05/06) |
| Typical release time | 30 ms (when controlled via pins 05/06) |
| Contact switching type | 1 confirmation current path |
| Contact material | AgCuNi, + Au |
| Limiting continuous current | 100 mA |
| Sq. Total current | 9 A2 (observe derating) |
| Switching capacity | min. 20 mW |
| Output fuse | 150 mA Fast-blow |
| pluggable | yes |
| Connection method | Pluggable onto VIP base module |
| Width | 10 mm |
| Height | 75 mm |
| Depth | 112 mm |
| Color (Housing) | yellow (RAL 1018) |
| Housing material | PA 6.6 |
| Category | 4 |
| Performance level (PL) | e (3 A DC13; 3 A AC15; 8760 switching cycles/year) |
| Safety Integrity Level (SIL) | 3 |
| Degree of protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient temperature (operation) | -40 °C ... 70 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15 g (in the event of continuous stress caused by shock, contact reactions are possible.) |
| Vibration (operation) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
| Certificate | 70134758 |
| Mounting type | Plug-in mounting |
| Mounting position | vertical or horizontal |
| Inrush current | min. 1 mA |
| Filter time | max. 3 ms (at pins 05/06 in the event of voltage dips at Us) |
| Protective circuit | Surge protection; 35 V suppressor diode (pins 05/06)33 V suppressor diode (pins 04/03)35 V suppressor diode (pins 02/03) |
| Status display | 2 x LED bi-color (green, red) |
| Output description | Safety-related N/C contacts |
| Number of outputs | 1 (undelayed) |
| Switching frequency | 0.1 Hz |
| Identification | CE-compliant |
| Assembly note | See derating curve |
| Diagnostic supply voltage UD | 24 V DC -20 % / +25 % (at pin 04) |
| Input current at UD | 7 mA (at pins 04/03 for UD; + 100 mA depending on load at pin 02) |
| Inrush current at UD | typ. 200 mA (Δt < 1 ms; at pins 04/03 for UD) |
| Switching voltage | min. 19.2 V DC |
