In most procurement cycles, UC1000-18GS-2EP-IO-V15 is considered with P&F Photoelectric Sensor, Pepperl Fuchs Uc2000 30Gm Iur2 V15 and Banner Ultrasonic Sensor, giving decision-makers confidence that theyβve chosen the most dependable component.
Pepperl Fuchs UC1000-18GS-2EP-IO-V15 Ultrasonic Sensor
The Pepperl Fuchs UC1000-18GS-2EP-IO-V15 Ultrasonic Sensor offers a Cylindrical design, 70 ... 1000 mm
sensing range, 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected output, and Connector plug M12 x 1 , 5-pin
connection. Manufactured by Pepperl Fuchs under the P&F Ultrasonic Sensor category, this model belongs to the diffuse reflective sensor.
| Brand | Pepperl Fuchs |
| Product Type | Ultrasonic Sensor |
| Model Number | UC1000-18GS-2EP-IO-V15 |
Pepperl Fuchs UC1000-18GS-2EP-IO-V15 Ultrasonic Sensor β Technical Specifications
| Specification | Value |
|---|---|
| Type of Sensing | Diffuse Reflective |
| Design | Cylindrical |
| Sensing range | 70 ... 1000 mm |
| Adjustment range | 90 ... 1000 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 255 kHz |
| Response delay | minimum : 28 ms, factory setting: 56 ms |
| LED green | solid: power on, flashing: standby mode or IO-Link communication |
| LED yellow 1 | solid: object in evaluation range, flashing: switch point programming, object detected |
| LED yellow 2 | - |
| LED red | solid: error, flashing: switch point programming, object not detected |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Output type | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Default setting | - |
| Repeat accuracy | β€ Β± 0.1 % of full-scale value |
| Switching frequency | factory setting: 10 Hz, programmable to 23 Hz |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Temperature influence | with temperature compensation: β€ Β± 0.75% of the end value 10 min after switching on the sensor (factory setting), with enhanced temperature compensation: β€ Β± 0.75% of the end value 2 min after switching on the sensor, without temperature compensation: 0.17 %/K |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 IEC 61131-9:2013 |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated β€36 V |
| Ambient temperature | -25 ... 70 Β°C (-13 ... 158 Β°F) |
| Storage temperature | -40 ... 85 Β°C (-40 ... 185 Β°F) |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP67 |
| Material Housing | stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts |
Please speak to our Technical Engineer for P&F Push-pull Diffuse Reflective Sensor UC1000-18GS-2EP-IO-V15 at attractive prices. Technical Specs Summary of UC1000-18GS-2EP-IO-V15 includes Diffuse Reflective, Cylindrical design with a sensing range of 70 ... 1000 mm
and an adjustment range of 90 ... 1000 mm
. It has a dead band of 0 ... 70 mm
and uses a standard target plate of 100 mm x 100 mm. The transducer frequency is approximate approx. 255 kHz
, and the response delay of minimum : 28 ms, factory setting: 56 ms. Operating at 10 ... 30 V DC , ripple 10 %SS, the sensor includes 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected. It offers repeat accuracy of β€ Β± 0.1 % of full-scale value, a switching frequency of factory setting: 10 Hz, programmable to 23 Hz, range hysteresis of 1 % of the adjusted operating range (default settings), programmable , min. 1 mm, and a temperature influence of with temperature compensation: β€ Β± 0.75% of the end value 10 min after switching on the sensor (factory setting), with enhanced temperature compensation: β€ Β± 0.75% of the end value 2 min after switching on the sensor, without temperature compensation: 0.17 %/K. The sensor operates in ambient temperatures from -25 ... 70 Β°C (-13 ... 158 Β°F)
and can be stored in temperatures from -40 ... 85 Β°C (-40 ... 185 Β°F)
. It feature Connector plug M12 x 1 , 5-pin
, an IP67 protection rating, and an stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts
housing. Match Your Needs with a Quote for your requirement of P&F Push-pull Diffuse Reflective Sensor. We lead with pricing that's more favorable and support that's more attentive than other Suppliers & Traders.