In most procurement cycles, KCD2-STC-EX1-ES-SP is considered with P&F Photoelectric Sensor, Pepperl Fuchs Kfd2 Stc5 Ex2 and Pepperl Fuchs Double Sheet Sensors, giving decision-makers confidence that theyโve chosen the most dependable component.
Pepperl Fuchs KCD2-STC-Ex1-ES-SP Transmitter Power Supplies
The Pepperl Fuchs KCD2-STC-Ex1-ES-SP Transmitter Power Supplies offers a Analog input signal type, on 35 mm DIN mounting rail, and spring terminals connection. Manufactured by Pepperl Fuchs under the P&F Transmitter Power Supplies category.
| Brand | Pepperl Fuchs |
| Product Type | Transmitter Power Supplies |
| Model Number | KCD2-STC-Ex1-ES-SP |
Pepperl Fuchs KCD2-STC-Ex1-ES-SP Transmitter Power Supplies โ Technical Specifications
| Specification | Value |
|---|---|
| Signal type | Analog input |
| Safety Integrity Level (SIL) | SIL 3 |
| Systematic capability (SC) | SC 3 |
| Supply Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | โค 10 % |
| Rated current | โค 50 mA |
| Power dissipation | โค 800 mW |
| Power consumption | โค 1.2 W |
| Connection side (Input) | field side |
| Connection (Input) | terminals 1+, 2-; 3+, 4- |
| Input signal | 4 ... 20 mA , limited to approx. 27 mA reverse polarity protected |
| Open circuit voltage/short-circuit current (Input) | - |
| Input resistance | - |
| Available voltage | - |
| Connection side (Output) | control side |
| Connection (Output) | terminals 5-, 6+ |
| Load | 0 ... 300 ฮฉ (source mode) |
| Output signal | source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 ฮฉ, 0.1 %), sink mode: 4 ... 20 mA, operating voltage 16 ... 28 V For additional internal or external loads the voltage drop has to be considered, e. g. 250 ฮฉ x 20 mA = 5 V. |
| Frequency range | field side into the control side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB), control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
| Settling time | โค 200 ms |
| Display elements | LEDs |
| Labeling | space for labeling at the front |
| Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) |
| Connection | spring terminals |
| Mounting | on 35 mm DIN mounting rail |
| Ambient temperature | -20 ... 70 ยฐC (-4 ... 158 ยฐF) |
| Degree of protection | IP20 |
| Mass | approx. 100 g |
Reach Us by Email for Pepperl Fuchs KCD2-STC-Ex1-ES-SP Transmitter Power Supplies KCD2-STC-Ex1-ES-SP at Discounted Rates. Key Technical Features of 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) are SIL 3 with - range, SC 3 and Power Rail or terminals 9+, 10- ratings. Operating on โค 10 % it consumes โค 1.2 W. The field side connects via input connection, 4 ... 20 mA , limited to approx. 27 mA reverse polarity protected, supporting up to source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 ฮฉ, 0.1 %), sink mode: 4 ... 20 mA, operating voltage 16 ... 28 V For additional internal or external loads the voltage drop has to be considered, e. g. 250 ฮฉ x 20 mA = 5 V.. The control side includes 0 ... 300 ฮฉ (source mode). It features a LEDs settling time, and space for labeling at the front indicators. The unit measures spring terminals, mounts on a 1212mm DIN rail, and operates between IP20. With a an IP120 rating and approximately Pepperl Fuchs KCD2-STC-Ex1-ES-SP Transmitter Power Supplies weight, it ensures reliable performance. Navigate Your Needs with a Quote for your requirement of spring terminals. Our pricing and support are unrivaled, especially when compared to other Competitors.
