In most procurement cycles, KCD0-SD3-EX1-1045 is considered with P&F Photoelectric Sensor, Pepperl Fuchs Kfd2 Stc5 Ex2 and Pepperl Fuchs Double Sheet Sensors, giving decision-makers confidence that theyβve chosen the most dependable component.
Pepperl Fuchs KCD0-SD3-Ex1-1045 Solenoid Driver
The Pepperl Fuchs KCD0-SD3-Ex1-1045 Solenoid Driver offers a Digital Output signal type, on 35 mm DIN mounting rail , and screw terminals connection. Manufactured by Pepperl Fuchs under the P&F Solenoid Driver category.
| Brand | Pepperl Fuchs |
| Product Type | Solenoid Driver |
| Model Number | KCD0-SD3-Ex1-1045 |
Pepperl Fuchs KCD0-SD3-Ex1-1045 Solenoid Driver β Technical Specifications
| Specification | Value |
|---|---|
| Signal type | Digital Output |
| Safety Integrity Level (SIL) | SIL 3 |
| Systematic capability (SC) | SC 3 |
| Supply Connection | - |
| Rated voltage | loop powered |
| Rated current | - |
| Power dissipation | < 1.3 W |
| Power consumption | - |
| Connection side (Input) | control side |
| Connection (Input) | terminals 5+, 6- |
| Signal Level | 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Inrush current(Input) | β€ 200 mA after 100 Β΅s |
| Connection side (Output) | field side |
| Connection (Output) | terminals 1+, 2- |
| Internal resistor | approx. 285 Ξ© |
| Current | typ. 45 mA |
| Voltage | β₯ 10 V |
| Output current | 45 mA |
| Switching frequency | max. 10 Hz |
| Display elements | LEDs , display |
| Control elements | - |
| Labeling | space for labeling at the front |
| Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) |
| Connection | screw terminals |
| Mounting | on 35 mm DIN mounting rail |
| Ambient temperature | -20 ... 70 Β°C (-4 ... 158 Β°F) |
| Degree of protection | IP20 |
| Mass | approx. 150 g |
IndMALL Automation offers the P&F Current Limit 45 mA Solenoid Drivers KCD0-SD3-Ex1-1045. This solenoid driver features a digital output and is SIL 3 and SC 3 rated. It is loop-powered with a power consumption of less than 1.3 W. The control side uses terminals 5+ and 6- with a 1-signal range of 19-30 V DC and a 0-signal range of 0-5 V DC. The field side uses terminals 1+ and 2- with a typical resistance of 285 Ξ© and a current limit of 45 mA. It supports a maximum frequency of 10 Hz and operates within -20 to 70 Β°C. The housing is IP20 rated, and the device mounts on a 35 mm DIN rail. Dimensions are 12.5 x 119 x 114 mm, and it weighs approximately 150 g. Unlock exclusive pricing with a quote for your requirement of P&F Current Limit 45 mA Solenoid Drivers. Trust IndMALL Automation for competitive rates and dedicated support beyond other dealers.
Related Products
