Omron TL-W5F1 2M Proximity Sensor
Omron TL-W5F1 2M is a flat inductive proximity sensor with shielded mounting, a 5 mm sensing distance, and a 0 to 4 mm setting distance. It uses a DC 3-wire PNP output with NO operation, a pre-wired 2 m cable, and a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, with an iron 18 × 18 × 1 mm standard sensing object. Response frequency is 300 Hz minimum, current consumption is 15 mA max. at 24 VDC with no load, and control-output load current is 200 mA. A red detection indicator and IP67 protection are listed. The TL-W5F1 is positioned within the Proximity sensor range from Omron sensor products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | TL-W5F1 2M |
Omron TL-W5F1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Flat Inductive |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output Configuration | DC 3-wire PNP |
| Operation Mode | NO |
| Connection | Pre-wired 2 M Cable |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 18 × 18 × 1 mm |
| Response Frequency | 300 Hz min. |
| Current Consumption | 15 mA max. at 24 VDC (no-load) |
| Control Output Load Current | 200 mA |
| Indicator | Detection indicator (red) |
| Protection Circuit | Reverse polarity protection, Surge suppressor |
| Ambient Temperature Range | Operating/Storage: −25 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Material | Aluminum die-cast, Heat-resistant ABS |
| Degree Of Protection | IP67 |
| Weight | Approx. 100 g |
The Omron TL-W5F1 2M Proximity Sensor features a flat inductive, shielded sensing arrangement with a 5 mm sensing distance and 0 to 4 mm setting distance. The electrical configuration is DC 3-wire PNP with NO operation, while the connection is a pre-wired 2 m cable. Power-supply voltage is 12 to 24 VDC. Ferrous metal is specified as the detectable object, and the standard sensing object is iron measuring 18 × 18 × 1 mm. Response frequency is 300 Hz minimum. Current consumption is 15 mA max. at 24 VDC with no load, and the control-output load current is 200 mA. A red detection indicator shows the specified output state.
Reverse-polarity protection and surge suppression are included in the protection circuit. The operating and storage range extends from -25 to 70°C without icing or condensation, with 35% to 95% humidity. Aluminum die-cast and heat-resistant ABS are listed as construction materials, while degree of protection is IP67. The model therefore combines shielded 5 mm sensing with PNP NO switching and a 2 m pre-wired connection within the TL-W family. For the corresponding shielded 5 mm model retaining the same sensing distance, supply range, cable length, and NO operation while changing from PNP to NPN output, see TL-W5E1 2M.
