Omron S8VS-09024 Power Supply
Omron S8VS-09024 SMPS is a 90 W switch mode power supply configured to provide 24 VDC with 3.75 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for structured installation inside industrial control panels. Screw terminals and terminal blocks provide fixed electrical connections for incoming power and the 24 VDC output circuit. Typical efficiency is specified at 83% with 100 VAC input and 84% with 200 VAC input. A green output indicator provides operating status. The 3.75 A capacity places this model above the 60 W, 2.5 A S8VS configurations. Within the S8VS Series, the S8VS-09024 provides a DIN rail 90 W, 24 VDC configuration. Compare other 90W power supplies from Omron automation.
| Brand | Omron |
| Product | Power Supply |
| Model Number | S8VS-09024 |
Omron S8VS-09024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 90 W |
| Output voltage | 24 VDC |
| Rated output current | 3.75 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 83% typ. (at 100 VAC input) 84% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 2.3 A max., 1.9 A typ. (at 100 VAC input) 1.4 A max., 1 A typ. (at 200 VAC input) |
| Input Leakage current | 0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15% With V.ADJ |
| Start-up time | 460 ms typ. (at 100 VAC input) 300 ms typ. (at 200 VAC input) |
| Hold time | 28 ms typ. (at 100 VAC input) 132 ms typ. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -10 to 60 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 490 g max. |
The Omron S8VS-09024 Power Supply provides 90 W rated power with a 24 VDC output and 3.75 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for control-panel installation. Typical efficiency is specified at 83% with 100 VAC input and 84% with 200 VAC input. These electrical values define a 24 VDC supply where connected load voltage, continuous current demand, incoming source, DIN rail space, and terminal access should be considered together. Connected equipment should require 24 VDC and remain within the rated 3.75 A output. Compared with the 60 W S8VS configurations, this model provides additional current while retaining the same nominal 24 VDC output.
The supplied comparison data includes a 240 W S8VS model that also provides 24 VDC but increases rated current to 10 A. This same-voltage comparison helps separate the load-voltage requirement from the amount of current available to connected equipment. A higher wattage unit becomes relevant when the downstream load requires more current than the 90 W model can supply. Input range and DIN rail mounting remain important installation checks. For a higher-capacity DIN rail configuration providing 240 W, 24 VDC, and 10 A output, compare the Omron S8VS-24024B.


