+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-09024AP Power Supply

Omron S8VS-09024AP SMPS is a 90 W switch mode power supply designed to provide 24 VDC with 3.75 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for organized installation inside electrical control panels. Screw terminals and terminal blocks provide fixed connection points for the incoming supply and 24 VDC output wiring. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. A green output indicator provides operating status. The 3.75 A capacity defines this model as a 90 W 24 VDC configuration. Within the S8VS Series, the S8VS-09024AP provides a DIN rail 90 W, 24 VDC configuration. Compare other 24V DIN rail power supplies from Omron automation equipment.

Omron S8VS-09024AP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-09024AP

Omron S8VS-09024AP Power Supply - Technical Specifications

SpecificationValue
Power rating90 W
Output voltage24 VDC
Rated output current3.75 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency83% typ. (at 100 VAC input) 85% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.3 A max., 1.9 A typ. (at 100 VAC input) 1.4 A max., 1.2 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time660 ms typ. (at 100 VAC input) 420 ms typ. (at 200 VAC input)
Hold time28 ms typ. (at 100 VAC input) 136 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight490 g max.

The Omron S8VS-09024AP Power Supply provides 90 W rated power with a 24 VDC output and 3.75 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured cabinet installation. Typical efficiency is specified at 83% with 100 VAC input and 85% with 200 VAC input. These values define a 24 VDC supply where connected equipment voltage, combined current demand, input-source compatibility, available DIN rail space, and terminal access should be considered together. Connected loads should require 24 VDC and keep continuous current demand within the rated 3.75 A output. The fixed screw-terminal arrangement provides defined wiring points for the input and output circuits.

The supplied comparison information includes a 240 W S8VS configuration that also provides 24 VDC but increases rated current to 10 A. Because the downstream voltage requirement remains unchanged, this comparison mainly reflects the difference in available current and total power capacity. A larger model becomes relevant when connected loads exceed the 3.75 A limit of the 90 W unit. DIN rail space and source compatibility should also be confirmed. For a higher-capacity DIN rail model providing 240 W, 24 VDC, and 10 A output, compare the Omron S8VS-24024B.