+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G03015C Power Supply

Omron S8FS-G03015C SMPS is a 30 W switch mode power supply configured to provide 15 VDC with 2.4 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is 86% with 100 VAC input and 88% with both 200 VAC and 230 VAC input. A green indicator provides output status during operation. The 15 VDC output places this model between lower- and higher-voltage configurations within the same 30 W power class. Within the S8FS-G Series, the S8FS-G03015C provides a direct-mount 30 W, 15 VDC configuration. Compare other 30W 15V power supplies from Omron control solutions.

Omron S8FS-G03015C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G03015C

Omron S8FS-G03015C Power Supply - Technical Specifications

SpecificationValue
Power rating30 W
Output voltage15 VDC
Rated output current2.4 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency86 % typ.(at 100 VAC input) 88 % typ.(at 200 VAC input) 88 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current0.72 A typ.(at 100 VAC input) 0.43 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time11 ms typ.(at 100 VAC input) 50 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight250 g max.

The Omron S8FS-G03015C Power Supply provides 30 W rated power with a 15 VDC output and 2.4 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is 86% at 100 VAC input and 88% at both 200 VAC and 230 VAC input. A green output indicator provides operating status. These values position the model in the 15 VDC class, where output voltage should be matched to the connected load before current capacity, input range, or mounting format is compared.

The connected load should require 15 VDC and remain within the 2.4 A rated current. Direct mounting requires adequate panel surface, while screw terminals establish the input and output connection method. Keeping nominal output voltage constant gives the clearest capacity comparison because wattage and current can then be evaluated without changing the electrical requirement. For a higher-capacity direct-mount 15 VDC configuration providing 600 W and 40 A, compare the Omron S8FS-G60015C.