Omron S8FS-C03524J Power Supply
Omron S8FS-C03524J SMPS is a 35 W switch mode power supply configured for 24 VDC power distribution in industrial control panels. It provides 1.5 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed electrical installation. The metal-frame unit has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 120 to 370 VDC. Its dimensions are 36 mm wide, 97 mm high, and 99 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C03524J provides a direct-mount 35 W, 24 VDC configuration. For other panel power requirements, compare 24V SMPS models from Omron automation products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C03524J |
Omron S8FS-C03524J Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 35W |
| Output voltage | 24V |
| Rated output current | 1.5A |
| Terminal type | Screw |
| Phase | Single |
| Number of output branches | 1 |
| Allowable supply voltage DC | 120-370 V |
| Mounting method | Direct mounting |
| Type | Metal frame |
| Efficiency | 87% |
| Temperature range | -20-60? |
| Rated supply voltage at AC 50 Hz | 100-240V |
| Height | 36mm |
| Width | 97mm |
| Depth | 99mm |
| Features | Terminal block facing upward |
| Allowable supply voltage AC | 85-264 V |
The Omron S8FS-C03524J Power Supply provides 35 W rated power with a 24 VDC output and 1.5 A rated current for industrial control applications. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated supply voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 120 to 370 VDC. Efficiency is specified at 87%. The metal-frame enclosure measures 36 mm wide, 97 mm high, and 99 mm deep, with the terminal block facing upward. These electrical and mechanical characteristics define the model as a compact 24 VDC power supply where connected load, mounting surface, enclosure depth, and terminal clearance should be considered during selection.
The connected equipment should require 24 VDC and have a combined current demand within the 1.5 A rating. Direct mounting differentiates this model from DIN rail configurations and should be checked against the available panel arrangement. The allowable AC and DC input ranges provide flexibility in matching different incoming supplies within the stated limits. Screw terminals provide fixed wiring, while the upward-facing connection layout should have sufficient clearance for conductor routing. Comparing models should begin with voltage compatibility, followed by current requirement, rated power, physical size, and installation method. For a lower-power direct-mount 24 VDC configuration rated at 15 W with 0.7 A output, see Omron S8FS-C01524J.


