+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C02524 Power Supply

Omron S8FS-C02524 SMPS is a 25 W switch mode power supply designed to provide 24 VDC power for industrial control equipment. It delivers 1.1 A rated output current and uses single-phase input, direct mounting, and screw terminals for panel installation. The metal-frame unit is specified at 88% efficiency and measures 35 mm wide, 82 mm high, and 99 mm deep, with the terminal block facing upward. Rated input voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 120 to 370 VDC. Within the S8FS-C Series, the S8FS-C02524 provides a direct-mount 24 VDC configuration. Compare other 24V SMPS models from Omron control solutions.

Omron S8FS-C02524 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C02524

Omron S8FS-C02524 Power Supply – Technical Specifications

SpecificationValue
Power rating25W
Output voltage24V
Rated output current1.1A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC120-370V
Mounting methodDirect mounting
TypeMetal frame
Efficiency88%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height35mm
Width82mm
Depth99mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264V

The Omron S8FS-C02524 Power Supply is a 25 W switch mode power supply providing 24 VDC with 1.1 A rated output current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 88%. Rated input voltage is 100 to 240 VAC, while the allowable AC range extends from 85 to 264 V and the allowable DC range extends from 120 to 370 V. Dimensions are 35 mm wide, 82 mm high, and 99 mm deep, with the terminal block facing upward. These electrical and dimensional specifications define a compact direct-mount 24 VDC power supply for control sections with comparatively small load requirements.

Selection should begin by confirming that the connected equipment requires 24 VDC and remains within the 1.1 A rated output. Direct mounting means the available panel surface and fixing arrangement should be checked before installation. The 99 mm enclosure depth and upward-facing terminal block should also be considered when planning wiring clearance. Screw terminals provide fixed input and output connections, while the allowable AC and DC supply ranges define the permitted incoming source conditions. For a higher-capacity direct-mount 24 VDC model rated at 50 W with 2.2 A output, see Omron S8FS-C05024J.