The Omron NX-OD5256-5 Machine Automation Controller is a high-performance Communications Interface Unit featuring 16 PNP output points designed for stable 24 VDC output applications. It supports both Switching Synchronous and Free-Run I/O refreshing for flexible control performance. With a dependable 0.5 ms ON / 1.0 ms OFF response time, this unit delivers precise and consistent switching for industrial automation equipment. Operating on a 24 VDC supply (20.4β28.8 VDC) with a maximum consumption of 5.80 W, it fits seamlessly into NX-Series configurations. Manufactured by Omron, part of the Omron Programmable Logic Controller (PLC) range, available under the Omron NX Series.
Switching Synchronous I/O refreshing and Free- Run refreshing
ON/OFF response time
0.5 ms max./ 1.0 ms max.
Dimensions (mm)
72 Γ 100 Γ 90 mm (WΓHΓD)
Power supply voltage
24 VDC (20.4 to 28.8 VDC)
Unit power consumption
5.80 W max.
Shock resistance
Conforms to IEC 60068-2-27. 147 m/s2, 3 times in X, Y, and Z directions
Vibration resistance
Conforms to IEC 60068-2-6. 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz, acceleration of 9.8 m/s2, 100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total).
Noise immunity
2 kV on power supply line (Conforms to IEC 61000-4-4.)
Pollution degree
2 or less: Meets IEC 61010-2-201.
Ambient operating temperature
0 to 55Β°C
Ambient operating humidity
10% to 95% (with no condensation)
Ambient storage temperature
-25 to 70Β°C (excluding battery)
Weight
390 g max.
Related Products
If youβre not fully sure about NX-OD5256-5, taking a closer look at Siemens PLC, Omron SMPS 24V 10A and Nx1P2 1040Dt1 often helps compare reliability, cost, and availability.
