Omron EE-SX674P-WR 1M Photomicrosensor
Omron EE-SX674P-WR 1M is a close-mounting through-beam slot photomicrosensor with a fixed 5 mm sensing gap, PNP output, and 1 m pre-wired cable. Its infrared LED creates the optical path across the slot, while the integrated receiving side responds when a target passes through the opening. Light-ON and Dark-ON operation can be selected to match the required control logic. The sensor operates from 5 to 24 VDC and consumes 12 mA maximum. An incident-light indicator provides visual operating status, while load short-circuit protection supports the output circuit. The pre-wired format removes the need for a separate plug connection at the sensor. The EE-SX674P-WR 1M supports the close-mounting photomicrosensor range from Omron sensing solutions.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX674P-WR 1M |
Omron EE-SX674P-WR 1M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Appearance | Close-mounting |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Light Source | Infrared LED |
| Power Supply Voltage | 5 to 24 VDC |
| Output Configuration | PNP |
| Connection Method | Pre Wired, Cable Length 1M |
| Current Consumption | 12 mA max. |
| Operation Mode | Dark-ON/ Light-ON (selectable) |
| Indicators | Incident light |
| Ambient Illumination | 1,000 lx max. with fluorescent light on the surface of the receiver |
| Ambient Temperature Range | Operating: −25 to +55°C, Storage: −30 to +80°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation) |
| Vibration Resistance | Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2) 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Protection Circuits | Load short circuit protection |
| Degree Of Protection | IEC60529 IP50 |
| Material | Polybutylene phthalate (PBT) |
The Omron EE-SX674P-WR 1M Photomicrosensor uses a close-mounting through-beam arrangement with a fixed 5 mm sensing slot and a PNP output. An infrared LED provides the optical source between the integrated transmitting and receiving sections, while an object entering the opening changes the output condition according to the selected switching mode. Dark-ON and Light-ON operation can be selected to match the connected control logic. The sensor operates from 5 to 24 VDC and consumes 12 mA maximum. A 1 m pre-wired cable provides the electrical connection, removing the need for a separate connector at the sensor body. An incident-light indicator provides visual operating status, while load short-circuit protection is specified for the output circuit. Ambient illumination is rated at 1,000 lx maximum with fluorescent light on the receiver surface.
The EE-SX674P-WR uses a PBT housing and operates from -25°C to 55°C, with a storage range extending from -30°C to 80°C. Vibration resistance is specified across 20 to 2,000 Hz with peak acceleration of 100 m/s², while shock resistance reaches 500 m/s² three times in each X, Y, and Z direction. The enclosure is rated IP50. Its PNP configuration, 5 mm sensing slot, selectable operating logic, infrared optical source, and 1 m cable provide a pre-wired alternative within the close-mounting EE-SX group. For the connector-based PNP version using the same 5 mm slot format, see the Omron EE-SX674P.
