Omron EE-SX675-WR 1M Photomicrosensor
Omron EE-SX675-WR 1M is a T-shaped through-beam slot photomicrosensor designed around a fixed 5 mm sensing gap with the slot center positioned at 10 mm. Its optical path changes when a target passes through the slot, while the NPN output provides the corresponding switching signal. Light-ON or Dark-ON operation can be selected to suit the required control logic. The sensor operates from 5 to 24 VDC, consumes 35 mA, and supports a 100 mA maximum load. A red light indicator provides visual status, while the 1 m pre-wired cable supports direct connection. Within the EE Series, the EE-SX675-WR 1M supports the T-shaped slot photomicrosensor range across Omron sensing technology.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX675-WR 1M |
Omron EE-SX675-WR 1M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Type | T-shaped, Slot center 10 mm |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Power Supply Voltage | 5 to 24 VDC |
| Control Output (Output Type) | NPN |
| Connection Method | Pre-wired 1 M cable |
| Cable Length | 1 m |
| Current Consumption | 35 mA |
| Operation Mode | Dark-ON/Light-ON |
| Control Output (Residual Voltage) | at 100 mA load current: 0.8 V max. at 40 mA load current: 0.4 V max. |
| Control Output (Load Current) | 100 mA max. |
| Indicator | Light indicator (red) |
| Luminous Method | Non-modulated |
| Ambient Temperature (Operating) | -25 to 55 ℃ (with no freezing or condensation) |
| Ambient Temperature (Storage) | -30 to 80 ℃ (with no freezing or condensation) |
| Ambient Humidity (Operating) | 5 to 85 % (with no condensation) |
| Ambient Humidity (Storage) | 5 to 95 % (with no condensation) |
| Vibration Resistance | Destruction: 20 to 2000 Hz, peak acceleration 100 m/s2, 1.5-mm double amplitude 2 h each in X, Y, and Z directions (4 min periods) |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IP50 |
| Material | Case: Polybutylene terephthalate (PBT) Emitter/Receiver Cover: Polycarbonate (PC) |
The Omron EE-SX675-WR 1M Photomicrosensor uses a T-shaped body with a fixed 5 mm through-beam slot and a slot center positioned at 10 mm. An object moving through the opening changes the optical path across the sensing gap, allowing the NPN output to provide the corresponding switching state. Light-ON or Dark-ON operation can be selected according to the required control logic. The sensor operates from 5 to 24 VDC and consumes 35 mA. Its output supports a maximum load current of 100 mA, with residual voltage specified at 0.8 V maximum at a 100 mA load and 0.4 V maximum at 40 mA. A red light indicator provides operating status, while the non-modulated optical arrangement and 1 m pre-wired cable support straightforward installation.
The EE-SX675-WR uses a PBT case with polycarbonate emitter and receiver covers. Operating temperature is specified from -25°C to 55°C, while storage extends from -30°C to 80°C. The unit is rated for vibration from 20 to 2,000 Hz under the stated test conditions and for shock up to 500 m/s² in each axis. IP50 protection is specified for the enclosure. Its T-shaped format and 10 mm slot-center dimension provide a defined geometry for mounting around moving tabs, plates, or mechanical elements passing through the opening. For an F-shaped alternative with the same 5 mm slot and a 1 m pre-wired connection, see the Omron EE-SX676-WR 1M.
