+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron E3Z-T61A 5M Photoelectric Sensor

The Omron E3Z-T61A 5M Photoelectric Sensor uses separate emitter and receiver units to provide through-beam object detection across a distance of up to 10 m. The E3Z-T61A-L 5M emitter sends red LED light at 660 nm toward the E3Z-T61A-D 5M receiver, establishing an optical path that is interrupted when a target enters the sensing area. An NPN output communicates the resulting detection state to compatible machine-control circuitry, while selectable Light-ON or Dark-ON operation supports different switching requirements. The sensor operates from 12 to 24 VDC and includes 5 m pre-wired cables for electrical connection. For 10 m NPN through-beam detection, the E3Z Series includes the E3Z-T61A within the long-range through-beam sensor range associated with Omron industrial automation.

Omron E3Z-T61A 5M Photoelectric Sensors
BrandOmron
ProductPhotoelectric Sensors
Model NumberE3Z-T61A 5M

Omron E3Z-T61A 5M Photoelectric Sensor – Technical Specifications

SpecificationValue
Sensing MethodThrough-beam
Sensing Distance10 m
Emitter NumberE3Z-T61A-L 5M
Receiver NumberE3Z-T61A-D 5M
Standard Sensing ObjectOpaque: 12-mm dia. min.
Light SourceRed LED (660 nm)
Power Supply Voltage12 to 24 VDC
Output ConfigurationNPN
Connection MethodPre-wired 5 M cable
Current Consumption35 mA max. (Emitter: 15 mA max., Receiver: 20 mA max.)
Control OutputLoad power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.
Operation ModeLight-ON/Dark-ON selectable
Response TimeOperate or reset: 1 ms max.
Sensitivity AdjustmentOne-turn adjuster
IndicatorsOperation indicator (orange), Stability indicator (green), Through-beam Emitter has power indicator (orange) only.
Ambient IlluminationIncandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient Temperature RangeOperating: −25 to 55°C, Some connector models: −40°C to 55°C, Storage: −40 to 70°C (with no icing or condensation)
Ambient Humidity RangeOperating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation Resistance20 MΩ min. at 500 VDC
Dielectric Strength1,000 VAC, 50/60 Hz for 1 min
Vibration ResistanceDestruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock ResistanceDestruction: 500 m/s2 3 times each in X, Y, and Z directions
Protection CircuitsReversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection
Degree Of ProtectionIEC, IP67
MaterialPBT (polybutylene terephthalate), Modified polyarylate
WeightApprox. 30 g

The Omron E3Z-T61A 5M Photoelectric Sensor uses through-beam sensing across a specified distance of 10 m. The optical arrangement includes the E3Z-T61A-L emitter and E3Z-T61A-D receiver, with a 660 nm red LED establishing the sensing beam. An opaque target of 12 mm diameter minimum is specified. The NPN output supports a load supply voltage up to 26.4 VDC and a load current up to 100 mA. The units operate from 12 to 24 VDC and consume 35 mA maximum in total, specified as 15 mA for the emitter and 20 mA for the receiver. Light-ON or Dark-ON operation is selectable, while operate or reset time is 1 ms maximum. A one-turn adjuster supports setup, and 5 m pre-wired cables provide extended fixed wiring.

For an Omron NPN through-beam photoelectric sensor requiring visible red light, 10 m sensing, and longer cables, the relevant model is the E3Z-T61A. Operation and stability indicators provide visual status, while the emitter has a dedicated power indicator. Operating temperature extends from -25 to 55°C, with storage from -40 to 70°C. Reversed power-supply polarity, output short-circuit, and reversed output-polarity protection are specified. PBT and modified polyarylate are listed among the materials. For the same E3Z-T61A arrangement with shorter 2 m pre-wired cables, see E3Z-T61A 2M.