Omron E3C-S10 2M Photoelectric Sensor
The Omron E3C-S10 2M Photoelectric Sensor offers Through-beam, 100 mm Sensing distance, Pre-wired 2M Cable. Manufactured by Omron under the Omron Photoelectric Sensors category, this model belongs to the Omron E3C Series and includes an Emitter (E3C-S10L 2M) and Receiver (E3C-S10D 2M), it utilizing a Infrared LED (950 nm) Light source.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3C-S10 2M |
Omron E3C-S10 2M Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Through-beam |
| Sensing Distance | 100 mm |
| Emitter Number | E3C-S10L 2M |
| Receiver Number | E3C-S10D 2M |
| Standard Sensing Object | Opaque, 2-mm dia. min. |
| Light Source | Infrared LED (950 nm) |
| Connection Method | Pre-wired 2M Cable |
| Ambient Illumination | Incandescent lamp: 3,000 lx max., Sunlight 10,000 lx max. |
| Ambient Temperature Range | Operating/Storage: −25 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 85%RH (with no condensation) |
| Insulation Resistance | 20 MΩ min. at 500 VDC |
| Dielectric Strength | 500 VAC at 50/60 Hz for 1 minute |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IEC 60529 IP64 Limited to indoor use |
| Material | Polycarbonate |
| Weight | Approx. 50 g |
The Omron Compact Head Amplifier-separated Photoelectric Sensor family is trusted by engineers worldwide for repeatable detection, robust environmental ratings, and long-term supply support from Omron. With a miniature polycarbonate head and remote amplifier architecture, installers gain easier routing, reduced electrical noise at the sensing point, and faster maintenance—ideal for OEMs standardizing on global IEC norms. For this page, our focus model is Omron E3C-S10 2M. E3C-S10 2M.
In the Omron Compact Head Amplifier-separated Photoelectric Sensor range, the E3C-S10 2M uses a through‑beam emitter/receiver for crisp on/off at a fixed 100 mm with a 950 nm infrared LED, handling ambient light up to 10,000 lx. It carries IP64 protection, operates from −25 to 70 °C, and ships with a pre‑wired 2 m cable. Impact and vibration ratings (500 m/s² shock; 10–55 Hz, 1.5 mm amplitude) make it production‑line ready. We also reference insulation (≥20 MΩ at 500 VDC) and dielectric strength (500 VAC, 1 min) per datasheet norms for quality assurance on Omron E3C-S10 2M. E3C-S10 2M.
Typical uses for the Omron Compact Head Amplifier-separated Photoelectric Sensor include small‑part presence in pick‑and‑place nests, feeder bowl exit checks, cap/plug confirmation on short fixtures, and error‑proofing in light‑duty enclosures where short sensing span and high immunity are vital. The compact head allows mounting close to tooling, while the remote amplifier simplifies panel diagnostics and changeover on multi‑SKU lines—helping reduce downtime in assembly, packaging, and electronics stations. Omron E3C-S10 2M.
Related Products
