Omron E2EQ-X10B1D30-M1TJ 0.3M Proximity Sensor
Omron E2EQ-X10B1D30-M1TJ 0.3M provides 10 mm inductive sensing from an M30 shielded format with a 0 to 8 mm setting range. Its DC 3-wire PNP NO output connects through an M12 pre-wired Smartclick connector with a 0.3 m cable, while operating voltage spans 10 to 30 VDC and response frequency is 400 Hz. The E2EQ-X10B1D30-M1TJ 0.3M forms part of the E2EQ Series, with additional connector and switching choices available through the wider Smartclick PNP proximity sensor range from Omron Automation Products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2EQ-X10B1D30-M1TJ 0.3M |
Omron E2EQ-X10B1D30-M1TJ 0.3M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting type | Shielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 3-wire PNP |
| Operation Mode | NO |
| Connection Method | M12 Pre-wired Smartclick Connector 0.3 M Cable |
| Detectable Object | Ferrous metals |
| Standard Sensing Object | 30 × 30 × 1 mm |
| Response Frequency | 400 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C (with no icing or condensation) |
| Degree of Protection | IEC 60529:IP67, JIS C 0920 Annex 1: IP67G |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models:10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Fluororesin coating (Base material: brass), Fluorine resin, Fluororesin coating (Base material: brass), Zinc-plated iron, Vinyl chloride (PVC). |
The Omron E2EQ-X10B1D30-M1TJ 0.3M Proximity Sensor provides 10 mm sensing through an M30 shielded inductive body and has a 0 to 8 mm setting range. DC 3-wire PNP normally open output is connected through an M12 pre-wired Smartclick connector with a 0.3 m cable. Operating voltage is 10 to 30 VDC and response frequency is 400 Hz. Ferrous metals are specified with a 30 × 30 × 1 mm standard object. The 1-output specification reaches 200 mA max., with supply reverse-polarity, surge, output short-circuit, and output reverse-polarity protection included.
For an Omron Smartclick proximity sensor needing an M30 body, 10 mm sensing, and PNP NO switching, the corresponding model is the E2EQ-X10B1D30-M1TJ. Operating and storage temperature extends from -40 to 85°C, together with IEC 60529 IP67 and JIS C 0920 Annex 1 IP67G. Fluororesin-coated brass, fluorine resin, zinc-plated iron, and PVC are listed in the material details. Its connector format also suits requirements for an Omron M30 proximity sensor, Omron PNP proximity sensor, and Omron M12 connector proximity sensor. For another M30 model with the same 10 mm sensing range and a pre-wired 2 m cable, see E2EQ-X10C130 2M.
