Omron E2EC-C1R5D1 2M Proximity Sensor
Omron E2EC-C1R5D1 2M is a shielded cable-amplifier proximity sensor with a 5.4 mm diameter sensing head and 1.5 mm sensing distance. It uses a DC 2-wire output with NO operation, a pre-wired 2 m cable, and a 12 to 24 VDC power supply. These specifications identify the model as an E2EC cable-amplifier sensor where sensing-head size, sensing distance, wiring method, and switching mode are the main selection points. The 1.5 mm range differentiates it from shorter-range E2EC variants while retaining the same two-wire connection concept. The E2EC-C1R5D1 belongs to the Proximity sensor range from Omron sensor products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2EC-C1R5D1 2M |
Omron E2EC-C1R5D1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Cable Amplifier |
| Sensing Distance | 1.5 mm |
| Output Configuration | DC 2-Wire |
| Operation Mode | NO |
| Connection | Pre-wired 2 M Cable |
The Omron E2EC-C1R5D1 2M Proximity Sensor is specified as a shielded cable-amplifier model with a 5.4 mm diameter sensing head and a 1.5 mm sensing distance. Its electrical arrangement is DC 2-wire with NO operation, and connection is through a pre-wired 2 m cable. The power-supply range is 12 to 24 VDC. Unlike cylindrical E2B and E2E models where body size, mounting style, and output transistor are major differentiators, this E2EC configuration is identified primarily by the cable-amplifier architecture, sensing-head diameter, 1.5 mm detection range, two-wire circuit, and cable length. These specifications establish the core electrical and sensing identity of the E2EC-C1R5D1 2M without adding values that are not present in the source data.
Within the E2EC family, model selection can therefore be narrowed by sensing distance and sensing-head size while retaining the DC 2-wire NO connection concept. The 2 m pre-wired format also distinguishes this product from connector-based proximity sensors in other Omron series. The supplied row does not provide response frequency, current consumption, environmental limits, or protection ratings for this model, so those values are not assigned here. A closely related E2EC cable-amplifier model available in the provided product set uses a smaller 3 mm diameter sensing head and a shorter 0.8 mm sensing distance while retaining DC 2-wire NO operation and a 2 m cable: E2EC-CR8D1 2M.
