Omron E2E-X8MD2 2M Proximity Sensor
Omron E2E-X8MD2 2M uses an M12 unshielded inductive sensing body with an 8 mm sensing distance and a 0 to 6.4 mm setting distance. Its DC 2-wire output operates in NC mode through a pre-wired 2 m oil-resistant PVC cable on a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, using an iron 30 × 30 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 0.8 kHz, and differential travel is 10% max. of sensing distance. A red operation indicator, surge suppression, load short-circuit protection, and IP67 protection are listed. The E2E-X8MD2 2M appears among 2-wire proximity sensors from Omron sensing products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X8MD2 2M |
Omron E2E-X8MD2 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M12 |
| Mounting | Unshielded |
| Sensing Distance | 8 mm |
| Setting Distance | 0 to 6.4 mm |
| Output Configuration | DC 2-wire |
| Operation Mode | NC |
| Connection | Pre Wired, Length 2M |
| Cable Specifications | PVC (oil-resistant) |
| Power Supply Voltage | 12 to 24 VDC |
| Standard Target | Iron, 30 × 30 × 1 mm |
| Leakage Current | 0.8 mA max |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 0.8 kHz |
| Indicator | Operation indicator (red) |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
The Omron E2E-X8MD2 2M Proximity Sensor combines an M12 unshielded inductive sensing structure with an 8 mm sensing distance and a 0 to 6.4 mm setting distance. It uses a DC 2-wire output with NC operation through a pre-wired 2 m oil-resistant PVC cable and operates from 12 to 24 VDC. Ferrous metal is specified as the detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 0.8 kHz, and differential travel is 10% max. of sensing distance. A red operation indicator is included, together with surge suppression and load short-circuit protection for the control and diagnostic output.
Environmental limits for the E2E-X8MD2 are -25 to 70°C during operation and -40 to 85°C during storage, with humidity from 35% to 95%. Temperature influence is ±10% max. of sensing distance at 23°C across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1,000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. IP67 is the specified protection level. For another DC 2-wire NC E2E model with a smaller M8 body, 2 mm sensing distance, and M12 connector, see E2E-X2D2-M3G.
