Omron E2E-X7D1-M1G: M18 NO Proximity Sensor in Chennai
The technical specifications for the Omron E2E-X7D1-M1G M18 NO Proximity Sensor:
- Sensor Head Diameter: M18 (18mm)
- Installation: Flush/Shielded
- Sensing Distance: 7 mm
- Connection Method: M12 Connector Models
- Switching: NO
- Output Configuration: DC 2 Wire
- Response Frequency: 0.5 kHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X7D1-M1G M18 NO Proximity Sensor Technical Specification:
| Sensor Head (Dia) | M18 (18mm) |
| Installation | Flush | Shielded |
| Sensing Distance | 7 mm |
| Connection Method | M12 Connector Models |
| Switching | NO |
| Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
| Differential travel | 15% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 18 × 18 × 1 mm |
| Response frequency | 0.5 kHz |
| Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
| Leakage current | 0.8 mA max |
| Indicator | Operation indicator (red) and setting indicator (green) |
| Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
Were you looking for the Omron E2E-X7D1-M1G in Chennai? You’re at the right place. This sensor has an M18 NO Proximity Sensor, flush shielded installation, 7 mm sensing distance, M12 connector models, DC 2 Wire output, 0.5 kHz response frequency, and operates on 12-24 VDC power. It has a maximum of 15% differential travel and is designed for detecting ferrous metal. The case is made of stainless steel (SUS303), and the sensing surface is PBT. Get the best prices for this sensor at IndMALL Automation.