Omron E2E-X5F1-M1: DC 3 Wire Proximity Sensor in Chennai
The Technical Specifications of Omron E2E-X5F1-M1 DC 3 Wire Proximity Sensor are :
- Sensor Head: M18
- Installation: Flush | Shielded
- Sensing Distance: 5 mm
- Connection Method: M12 Connector Models
- Switching: NO
- Output Configuration: PNP, DC 3 Wire
- Response frequency: 0.6 KHz
- Power supply voltage: 12 to 24 VDC
Omron DC 3 Wire Proximity Sensor E2E-X5F1-M1 Technical Specification:
| Sensor Head (Dia) | M18 |
| Installation | Flush | Shielded |
| Sensing Distance | 5 mm |
| Connection Method | M12 Connector Models |
| Switching | NO |
| Output Configuration | PNP, DC 3 Wire |
| Differential travel | 10% max. of sensing distance |
| Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Standard sensing object | Iron, 18 × 18 × 1 mm |
| Response frequency | 0.6 KHz |
| Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
| Leakage current | 13 mA max |
| Indicator | Operation indicator (red) |
| Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
| Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
| Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
| Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Material Case | Stainless steel (SUS303) |
| Material Sensing surface | PBT |
If you’re searching for Omron DC 3 wire proximity sensor E2E-X5F1-M1. you’ve found the right place. The sensor has an M18 head, flush shielded installation, 5 mm sensing distance, M12 connectors, Normally Open (NO) switching, PNP DC 3 wire output, 0.6 kHz response frequency, and needs 12-24 VDC power. Purchase from IndMALL Automation for the best prices on Omron Inductive Sensor in Chennai, assuring both durability and performance.
