Omron E2E-X5F1 2M: Inductive Sensor M18 in Chennai
The technical specifications for the Omron E2E-X5F1 2M Inductive Sensor M18 are:
- Sensor Head Diameter: M18
- Installation: Flush (Shielded)
- Sensing Distance: 5 mm
- Connection Method: Pre-Wired Models (2 meters)
- Cable Specifications: PVC (Oil-Resistant)
- Switching: Normally Open (NO)
- Output Configuration: PNP, DC 3 Wire
- Response Frequency: 0.6 KHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X5F1 2M Inductive Sensor M18 Technical Specification:
Sensor Head (Dia) | M18 |
Installation | Flush | Shielded |
Sensing Distance | 5 mm |
Connection Method | Pre-wired Models (2 m) |
Cable Specifications | PVC (oil-resistant) |
Switching | NO |
Output Configuration | PNP, DC 3 Wire |
Differential travel | 10% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 18 × 18 × 1 mm |
Response frequency | 0.6 KHz |
Power supply voltage | 12 to 24 VDC ripple (p-p) 10% max. |
Leakage current | 13 mA max |
Indicator | Operation indicator (red) |
Protection circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
Ambient air temperature | Operating Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at the rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
If you’re seeking Omron E2E X5F1 2M Inductive Sensor M18, you’ve come to the right place. The Omron E2E-X5F1 2M Sensor M18 features an M18 head, flush shielded installation, 5 mm sensing, 2m pre-wired connection, oil-resistant PVC cable, Normally Open (NO) switching, PNP DC 3 wire output, 0.6 kHz response frequency, and operates on 12-24 VDC power. IndMALL Automation offers the best offers on your purchase in Chennai.